Airworthiness directives › 2000-02-34
AD 2000-02-34 Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100) Series Airplanes
Applicability*9
All Model CL-600-2B19 (Regional Jet Series 100) series airplanes, certificated in any category.
Compliance
Required as indicated, unless accomplished previously. To prevent undetected accretion of ice on the wings, which could result in reduced controllability of the airplane during normal icing conditions, accomplish the following: AFM Revision (a) Within 10 days after the effective date of this AD: Revise the FAA-approved Canadair Regional Jet Airplane Flight Manual (AFM) by inserting a copy of the pages specified in paragraphs (a)(1), (a)(2), and (a)(3) of this AD into the AFM. (1) Revise the Limitations Section to include pages 2 and 3 of Canadair Regional Jet Temporary Revision (TR) RJ/61-2, dated October 30, 1998. (2) Revise the Emergency Procedures Section to include pages 4 through 6 inclusive of Canadair Regional Jet TR RJ/61-2, dated October 30, 1998. (3) Revise the Normal Procedures Section to include pages 7 through 27 inclusive of Canadair Regional Jet TR RJ/61-2, dated October 30, 1998. Alternative Methods of Compliance (b) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, New York Aircraft Certification Office (ACO), FAA, Engine and Propeller Directorate. Operators shall submit their requests through an appropriate FAA Principal Operations Inspector, who may add comments and then send it to the Manager, New York ACO. Note 1: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the New York ACO. Special Flight Permits (c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished. (d) The AFM revision shall be done in accordance with Canadair Airplane Flight Manual Temporary Revision RJ/61-2, dated October 30, 1998. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from Bombardier, Inc., Canadair, Aerospace Group, P.O. Box 6087, Station A, Montreal, Quebec H3C 3G9, Canada. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. (e) This amendment becomes effective on March 13, 2000. Issued in Renton, Washington, on January 28, 2000. Donald L. Riggin, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 00-2412 Filed 2-4-00; 8:45 am] BILLING CODE 4910-13-P
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1