TrackAD

Airworthiness directives › 2003-14-17

AD 2003-14-17 Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes

2003-08-22
2003-07-18
—
—
Airframe
—

Applicability*9

Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, as listed in Bombardier Alert Service Bulletin A601R-26-017, Revision ‘A,’ dated September 8, 2000; certificated in any category.

Compliance

Required as indicated, unless accomplished previously. To prevent fluid contamination inside the fire and overheat control unit, which could result in a false fire alarm and consequent emergency landing, accomplish the following: Installation of Protective Tape (a) Within 250 flight hours or 30 days after the effective date of this AD, whichever occurs first, install protective tape on the external cover of the fire and overheat control unit located in the flight compartment per Bombardier Alert Service Bulletin A601R-26-017, Revision ‘A,’ dated September 8, 2000. (b) Installation of protective tape on the external cover of the fire and overheat control in the flight compartment, done before the effective date of this AD per Bombardier Alert Service Bulletin A601R-26-017, dated August 4, 2000, is acceptable for compliance with the requirements of this AD. Alternative Methods of Compliance (c) In accordance with 14 CFR 39.19, the Manager, New York Aircraft Certification Office (ACO), FAA is authorized to approve alternative methods of compliance for this AD. Incorporation by Reference (d) Unless otherwise provided in this AD: The actions must be done in accordance with Bombardier Alert Service Bulletin A601R-26-017, Revision ‘A,’ dated September 8, 2000. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from Bombardier, Inc., Canadair, Aerospace Group, P.O. Box 6087, Station Centreville, Montreal, Quebec H3C 3G9, Canada. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the FAA, New York Aircraft Certification Office, 10 Fifth Street, Third Floor, Valley Stream, New York; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. Note: The subject of this AD is addressed in Canadian airworthiness directive CF-2000-35, dated December 14, 2000. Effective Date (e) This amendment becomes effective on August 22, 2003. Issued in Renton, Washington, on July 9, 2003. Ali Bahrami, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 03-17816 Filed 7-17-03; 8:45 am] BILLING CODE 4910-13-P

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1