AD 2005-02-09 Airworthiness Directives; Airbus Model A319, A320, and A321 Series Airplanes

Required as indicated, unless accomplished previously. To ensure continued structural integrity of these airplanes, accomplish the following: Revise Airworthiness Limitations Section (ALS) (a) For all airplanes: Within 6 months after the effective date of this AD, revise the ALS of the Instructions for Continued Airworthiness in accordance with a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the Direction Generale de l'Aviation Civile (DGAC) (or its delegated agent). One approved method of compliance is incorporating Airbus A318/A319/A320/A321 Maintenance Planning Document (MPD), sub-Section 9-1-2, “Life Limited Parts,” and sub-Section 9-1-3, “Demonstrated Fatigue Life Parts,” both Revision 06, both dated June 13, 2003. Note 1: Airbus Service Information Letter 32-098, dated December 22, 2003, may be used as a source of service information for managing life limited and demonstrated fatigue life parts that were not previously tracked. (b) For all airplanes except Model A319 series airplanes on which Airbus Modification 28238, 28162, and 28342 was incorporated during production: Within 6 months after the effective date of this AD, revise the ALS of the Instructions for Continued Airworthiness in accordance with a method approved by the Manager, International Branch, ANM-116; or the DGAC (or its delegated agent). One approved method of compliance is incorporating both Airbus A318/A319/A320/A321 MPD, sub-Section 9-2, “Airworthiness Limitation Items” (ALI), Revision 06, dated June 13, 2003; and Airbus A318/A319/A320/A321 ALI, AI/SE-M4/95A.0252/96, Issue 6, dated May 15, 2003 (approved by the DGAC on July 15, 2003). (c) For Model A319 and A320 series airplanes: Accomplishing the approved revision of the ALS specified in paragraph (b) of this AD terminates the repetitive inspections required by paragraphs (b) and (c) of AD 2004-03-06, amendment 39-13450. (d) Except as provided by paragraph (e) of this AD: After the actions specified in paragraphs (a) and (b) of this AD have been accomplished, no alternative life limits, inspections, or inspection intervals may be used. Alternative Methods of Compliance (e) In accordance with 14 CFR 39.19, the Manager, International Branch, ANM-116, is authorized to approve alternative methods of compliance for this AD. Note 2: The subject of this AD is addressed in French airworthiness directive F-2004-018, dated February 4, 2004; and in French airworthiness directive F-2004-032, dated February 18, 2004. Effective Date (f) This amendment becomes effective on March 3, 2005. Issued in Renton, Washington, on January 18, 2005. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 05-1514 Filed 1-26-05; 8:45 am] BILLING CODE 4910-13-P