TrackAD

Airworthiness directives › 2005-13-34

AD 2005-13-34 Airworthiness Directives; Boeing Model 777-200 and -300 Series Airplanes

2005-08-02
2005-06-28
—
—
Airframe
—

Models named: 777-200, -300 series. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

Model 777-200 and -300 series airplanes, certificated in any category, line numbers 001 through 264 inclusive.

Compliance

Required as indicated, unless accomplished previously. To prevent overheating of ceiling and sidewall light connectors, which could result in smoke and a possible fire in the passenger cabin, accomplish the following: Service Bulletin References (a) The following information pertains to the service bulletin referenced in this AD: (1) The term “service bulletin,” as used in this AD, means the Accomplishment Instructions of Boeing Special Attention Service Bulletin 777-33-0019, Revision 1, dated March 11, 2004. (2) Although the service bulletin referenced in this AD specifies to submit information to the manufacturer, this AD does not include such a requirement. (3) Actions accomplished before the effective date of this AD per Boeing Special Attention Service Bulletin 777-33-0019, dated July 19, 2001, are acceptable for compliance with the corresponding actions required by this AD. Replacement of Light Connectors (b) Within 60 months after the effective date of this AD: Replace, with improved parts, the existing ceiling and sidewall light connectors and wire bundle connectors in the areas specified in the service bulletin; by accomplishing all actions in Work Packages 1, 2, and 3, of the Accomplishment Instructions of the service bulletin. Note 1: Boeing Special Attention Service Bulletin 777-33-0019 refers to Diehl Service Information Letter 3352-33-01/01, dated June 20, 2001, as an additional source of service information for accomplishment of the connector replacements. Alternative Methods of Compliance (c) In accordance with 14 CFR 39.19, the Manager, Seattle Aircraft Certification Office, FAA, is authorized to approve alternative methods of compliance for this AD. Incorporation by Reference (d) Unless otherwise specified in this AD, the actions shall be done in accordance with Boeing Special Attention Service Bulletin 777-33-0019, Revision 1, dated March 11, 2004. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. To get copies of this service information, go to Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207. To inspect copies of this service information, go to the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or to the National Archives and Records Administration (NARA). For information on the availability of this material at the NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Effective Date (e) This amendment becomes effective on August 2, 2005. Issued in Renton, Washington, on June 21, 2005. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 05-12635 Filed 6-27-05; 8:45 am] BILLING CODE 4910-13-P

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1