AD 2006-13-18 Airworthiness Directives; McDonnell Douglas Model DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, and DC-9-34F Airplanes; and Model DC-9-40 and DC-9-50 Series Airplanes

Models named: DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, DC-9-34F, DC-9-41, DC-9-51. Read the applicability below — it usually turns on serial or part numbers too.

This AD applies to McDonnell Douglas Model DC-9-31, DC-9-32, DC-9-32F, DC-9-33F, DC-9-34, DC-9-34F, DC-9-41, and DC-9-51 airplanes, certificated in any category; as identified in Boeing Service Bulletin DC9-28-214, dated December 16, 2005.

You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done. Installation (f) Within 60 months after the effective date of this AD, install a bonding jumper from the boost pump volute to the fuel tank structure, and do all applicable related investigative and corrective actions before further flight; by doing all the actions specified in the Accomplishment Instructions of Boeing Service Bulletin DC9-28-214, dated December 16, 2005. Alternative Methods of Compliance (AMOCs) (g)(1) The Manager, Los Angeles Aircraft Certification Office, FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19. (2) Before using any AMOC approved in accordance with § 39.19 on any airplane to which the AMOC applies, notify the appropriate principal inspector in the FAA Flight Standards Certificate Holding District Office. Material Incorporated by Reference (h) You must use Boeing Service Bulletin DC9-28-214, dated December 16, 2005, to perform the actions that are required by this AD, unless the AD specifies otherwise. The Director of the Federal Register approved the incorporation by reference of this document in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Contact Boeing Commercial Airplanes, Long Beach Division, 3855 Lakewood Boulevard, Long Beach, California 90846, Attention: Data and Service Management, Dept. C1-L5A (D800-0024), for a copy of this service information. You may review copies at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street SW., Room PL-401, Nassif Building, Washington, DC; on the Internet at http://dms.dot.gov ; or at the National Archives and Records Administration (NARA). For information on the availability of this material at the NARA, call (202) 741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html . Issued in Renton, Washington, on June 22, 2006. Kalene C. Yanamura, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 06-5871 Filed 7-3-06; 8:45 am] BILLING CODE 4910-13-P

This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent point-contact arcing or filament heating in the fuel tank, which, in the event of a short or ground fault inside the fuel tank, could result in a fuel tank explosion and consequent loss of the airplane.