AD 2008-09-23 Airworthiness Directives; Bombardier Inc. Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes

This AD applies to all Bombardier Inc. Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes, certificated in any category, all serial numbers.

Unless already done, do the following actions. (1) Within 60 days after June 6, 2008 (the effective date of AD 2008-09-23), revise the ALS of the Instructions for Continued Airworthiness to incorporate the CDCCL data specified in CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision (TR) 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15 and CL-600-2D24 Maintenance Requirements Manual CSP B-053. Note 1: The actions required by paragraph (f)(1) of this AD may be done by inserting a copy of the TR into the maintenance requirements manual. When the TR has been included in the general revision of the maintenance program, the general revision may be inserted into the maintenance requirements manual, provided the relevant information in the general revision is identical to that in the TR, and the temporary revision may be removed. (2) After accomplishing the actions specified in paragraph (f)(1) of this AD, no alternative CDCCLs may be used unless the CDCCLs are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (g)(1) of this AD. NEW INFORMATION Explanation of CDCCL Requirements Note 2: Notwithstanding any other maintenance or operational requirements, components that have been identified as airworthy or installed on the affected airplanes before the revision of the ALS of the Instructions for Continued Airworthiness, as required by paragraph (f) of this AD, do not need to be reworked in accordance with the CDCCLs. However, once the ALS of the Instructions for Continued Airworthiness has been revised, future maintenance actions on these components must be done in accordance with the CDCCLs. FAA AD Differences Note 3: This AD differs from the MCAI and/or service information as follows: No differences. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO, ANE-170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, New York, 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to ensure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act (44 U.S.C. 3502 et seq. ), the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Canadian Airworthiness Directive CF-2008-07, dated January 25, 2008; and CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006; for related information. Material Incorporated by Reference (i) You must use CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15 and CL-600-2D24 Maintenance Requirements Manual CSP B-053, to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register previously approved the incorporation by reference of CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15, and CL-600-2D24 Maintenance Requirements Manual CSP B-053, on June 6, 2008 (73 FR 24145, May 2, 2008). (2) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; e-mail thd.crj@aero.bombardier.com; Internet http://www.bombardier.com. (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Issued in Renton, Washington, on November 18, 2009. Stephen P. Boyd, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-28297 Filed 11-25-09; 8:45 am] BILLING CODE 4910-13-P

Unless already done, do the following actions. (1) Within 60 days after June 6, 2008 (the effective date of AD 2008-09-23), revise the ALS of the Instructions for Continued Airworthiness to incorporate the CDCCL data specified in CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision (TR) 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15 and CL-600-2D24 Maintenance Requirements Manual CSP B-053. Note 1: The actions required by paragraph (f)(1) of this AD may be done by inserting a copy of the TR into the maintenance requirements manual. When the TR has been included in the general revision of the maintenance program, the general revision may be inserted into the maintenance requirements manual, provided the relevant information in the general revision is identical to that in the TR, and the temporary revision may be removed. (2) After accomplishing the actions specified in paragraph (f)(1) of this AD, no alternative CDCCLs may be used unless the CDCCLs are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (g)(1) of this AD. NEW INFORMATION Explanation of CDCCL Requirements Note 2: Notwithstanding any other maintenance or operational requirements, components that have been identified as airworthy or installed on the affected airplanes before the revision of the ALS of the Instructions for Continued Airworthiness, as required by paragraph (f) of this AD, do not need to be reworked in accordance with the CDCCLs. However, once the ALS of the Instructions for Continued Airworthiness has been revised, future maintenance actions on these components must be done in accordance with the CDCCLs. FAA AD Differences Note 3: This AD differs from the MCAI and/or service information as follows: No differences. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York ACO, ANE-170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, New York, 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to ensure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act (44 U.S.C. 3502 et seq. ), the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Canadian Airworthiness Directive CF-2008-07, dated January 25, 2008; and CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006; for related information. Material Incorporated by Reference (i) You must use CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15 and CL-600-2D24 Maintenance Requirements Manual CSP B-053, to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register previously approved the incorporation by reference of CRJ 700/900 Series Regional Jet (Bombardier) Temporary Revision 2-222, dated March 30, 2006, to Section 3, “Fuel System Limitations,” of Part 2 of Bombardier CL-600-2C10, CL-600-2D15, and CL-600-2D24 Maintenance Requirements Manual CSP B-053, on June 6, 2008 (73 FR 24145, May 2, 2008). (2) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; e-mail thd.crj@aero.bombardier.com; Internet http://www.bombardier.com. (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Issued in Renton, Washington, on November 18, 2009. Stephen P. Boyd, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-28297 Filed 11-25-09; 8:45 am] BILLING CODE 4910-13-P