AD 2009-07-04 Airworthiness Directives; McDonnell Douglas Model MD-90-30 Airplanes

Models named: MD-90-30. Read the applicability below — it usually turns on serial or part numbers too.

This AD applies to McDonnell Douglas Model MD-90-30 airplanes, certificated in any category; as identified in Boeing Alert Service Bulletin MD90-29A021, Revision 1, dated August 29, 2008.

You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done. Modification (f) Within 18 months after the effective date of this AD, modify the auxiliary hydraulic power system and do all applicable related investigative and corrective actions by accomplishing all applicable actions specified in the Accomplishment Instructions of Boeing Alert Service Bulletin MD90-29A021, Revision 1, dated August 29, 2008. Do all applicable related investigative and corrective actions before further flight. Alternative Methods of Compliance (AMOCs) (g)(1) The Manager, Los Angeles Aircraft Certification Office, FAA, ATTN: Ken Sujishi, Aerospace Engineer, Cabin Safety/Mechanical and Environmental Systems Branch, ANM-150L, FAA, Los Angeles Aircraft Certification Office, 3960 Paramount Boulevard, Lakewood, California 90712-4137; telephone (562) 627-5353; fax (562) 627-5210; has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19. (2) To request a different method of compliance or a different compliance time for this AD, follow the procedures in 14 CFR 39.19. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO. Material Incorporated by Reference (h) You must use Boeing Alert Service Bulletin MD90-29A021, Revision 1, dated August 29, 2008, to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, 3855 Lakewood Boulevard, MC D800-0019, Long Beach, California 90846-0001; telephone 206-544-5000, extension 2; fax 206-766-5683; e-mail dse.boecom@boeing.com ; Internet https://www.myboeingfleet.com . (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html . Issued in Renton, Washington, on March 18, 2009. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-6752 Filed 3-30-09; 8:45 am] BILLING CODE 4910-13-P

This AD results from fuel system reviews conducted by the manufacturer, as well as reports of shorted wires in the right wheel well and evidence of arcing on the power cables of the auxiliary hydraulic pump. We are issuing this AD to prevent shorted wires or electrical arcing at the auxiliary hydraulic pump, which could result in a fire in the wheel well. We are also issuing this AD to reduce the potential of an ignition source adjacent to the fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.