AD 2009-10-10 Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes

This AD applies to Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, certificated in any category, serial numbers 10003 through 10260 inclusive; Model CL-600-2D15 (Regional Jet Series 705) airplanes and Model CL-600-2D24 (Regional Jet Series 900) airplanes, certificated in any category, serial numbers 15001 through 15095 inclusive.

Unless already done, do the following actions. (1) Within 450 flight hours after the effective date of this AD, inspect the OFV for proper operation of the manual mode motor and altitude limitation functions, in accordance with Part A of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006 (“the service bulletin”). If the OFV manual mode motor or altitude limitation functions do not operate properly, before further flight, do the actions specified in paragraphs (f)(1)(i) and (f)(1)(ii) of this AD. Repeat the inspection thereafter at intervals not to exceed 450 flight hours. Accomplishing the actions specified in paragraph (f)(3) of this AD terminates the requirements of this paragraph. (i) Make sure that the electrical connectors, MPE23P1 and MPE23P2, are connected to the OFV. (ii) Repeat the inspection of the OFV for proper operation of the manual mode motor and altitude limitation functions, in accordance with Part A of the service bulletin. If the OFV manual mode motor or altitude limitation functions do not operate properly, before further flight, replace the OFV with a new or serviceable valve in accordance with Tasks 21-32-01-000-801 and 21-32-01-400-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009, and do the inspection of the OFV specified in paragraph (f)(1) of this AD. (2) Prior to accomplishing paragraph (f)(3) of this AD: Install modified CPC units, Part Number GG670-98002-7, in accordance with Part B of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006. (3) Installing modified CPCPs, Part Number GG670-98001-11, in accordance with Part C of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006, terminates the requirements of paragraph (f)(1) of this AD. FAA AD Differences Note 1: This AD differs from the MCAI and/or service information as follows: (1) The MCAI and Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006, do not describe corrective actions for findings of improper OFV manual mode motor and altitude limitation functions. This AD requires the actions in paragraphs (f)(1)(i) and (f)(1)(ii) of this AD, which includes replacing the valve if the OFV manual mode motor or altitude limitation functions do not operate properly. (2) This AD does not require the software update of the CPC units specified in Part 2 of the MCAI, and the software update of the CPCP specified in Part 3 of the MCAI. The planned compliance times for those actions would allow enough time to provide notice and opportunity for prior public comment on the merits of those actions. Therefore, we are considering further rulemaking to address this issue. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Fabio Buttitta, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, New York 11590; telephone (516) 228-7303; fax (516) 794-5531. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act, the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Canadian Airworthiness Directive CF-2009-08, dated March 9, 2009; Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006; and Tasks 21-32-01-000-801 and 21-32-01-400-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; for related information. Material Incorporated by Reference (i) You must use Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006; Task 21-32-01-000-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; and Task 21-32-01-400-801, of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; as applicable; to do the actions required by this AD, unless the AD specifies otherwise. The optional terminating actions, if done, must be done in accordance with Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006. Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009, contains the following effective pages: List of Effective Pages Page title/description Page number(s) Revision number Date shown on page(s) Title Page None shown 28 January 20, 2009. List of Chapters 1-2 28 January 20, 2009. Chapter 21 List of Effective Pages 1-39 None shown* January 20, 2009. Task 21-32-01-000-801 401-403 None shown* July 20, 2008. Task 21-32-01-400-801 408-411 None shown* July 20, 2008. (* The revision level is specified only on the title page and List of Chapters pages of this document.) (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; e-mail thd.crj@aero.bombardier.com ; Internet http://www.bombardier.com. (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Issued in Renton, Washington, on May 6, 2009. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-11139 Filed 5-13-09; 8:45 am] BILLING CODE 4910-13-P

Unless already done, do the following actions. (1) Within 450 flight hours after the effective date of this AD, inspect the OFV for proper operation of the manual mode motor and altitude limitation functions, in accordance with Part A of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006 (“the service bulletin”). If the OFV manual mode motor or altitude limitation functions do not operate properly, before further flight, do the actions specified in paragraphs (f)(1)(i) and (f)(1)(ii) of this AD. Repeat the inspection thereafter at intervals not to exceed 450 flight hours. Accomplishing the actions specified in paragraph (f)(3) of this AD terminates the requirements of this paragraph. (i) Make sure that the electrical connectors, MPE23P1 and MPE23P2, are connected to the OFV. (ii) Repeat the inspection of the OFV for proper operation of the manual mode motor and altitude limitation functions, in accordance with Part A of the service bulletin. If the OFV manual mode motor or altitude limitation functions do not operate properly, before further flight, replace the OFV with a new or serviceable valve in accordance with Tasks 21-32-01-000-801 and 21-32-01-400-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009, and do the inspection of the OFV specified in paragraph (f)(1) of this AD. (2) Prior to accomplishing paragraph (f)(3) of this AD: Install modified CPC units, Part Number GG670-98002-7, in accordance with Part B of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006. (3) Installing modified CPCPs, Part Number GG670-98001-11, in accordance with Part C of the Accomplishment Instructions of Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006, terminates the requirements of paragraph (f)(1) of this AD. FAA AD Differences Note 1: This AD differs from the MCAI and/or service information as follows: (1) The MCAI and Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006, do not describe corrective actions for findings of improper OFV manual mode motor and altitude limitation functions. This AD requires the actions in paragraphs (f)(1)(i) and (f)(1)(ii) of this AD, which includes replacing the valve if the OFV manual mode motor or altitude limitation functions do not operate properly. (2) This AD does not require the software update of the CPC units specified in Part 2 of the MCAI, and the software update of the CPCP specified in Part 3 of the MCAI. The planned compliance times for those actions would allow enough time to provide notice and opportunity for prior public comment on the merits of those actions. Therefore, we are considering further rulemaking to address this issue. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Fabio Buttitta, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, New York 11590; telephone (516) 228-7303; fax (516) 794-5531. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act, the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Canadian Airworthiness Directive CF-2009-08, dated March 9, 2009; Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006; and Tasks 21-32-01-000-801 and 21-32-01-400-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; for related information. Material Incorporated by Reference (i) You must use Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006; Task 21-32-01-000-801 of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; and Task 21-32-01-400-801, of the Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009; as applicable; to do the actions required by this AD, unless the AD specifies otherwise. The optional terminating actions, if done, must be done in accordance with Bombardier Alert Service Bulletin A670BA-21-022, dated August 3, 2006. Bombardier CRJ Regional Jet Series Aircraft Maintenance Manual, CSP B-001, Part 2, Volume 1, Revision 28, dated January 20, 2009, contains the following effective pages: List of Effective Pages Page title/description Page number(s) Revision number Date shown on page(s) Title Page None shown 28 January 20, 2009. List of Chapters 1-2 28 January 20, 2009. Chapter 21 List of Effective Pages 1-39 None shown* January 20, 2009. Task 21-32-01-000-801 401-403 None shown* July 20, 2008. Task 21-32-01-400-801 408-411 None shown* July 20, 2008. (* The revision level is specified only on the title page and List of Chapters pages of this document.) (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; e-mail thd.crj@aero.bombardier.com ; Internet http://www.bombardier.com. (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Issued in Renton, Washington, on May 6, 2009. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-11139 Filed 5-13-09; 8:45 am] BILLING CODE 4910-13-P