Airworthiness directives › 2009-12-51
AD 2009-12-51 Airworthiness Directives; Turbomeca S.A. Arriel 1A1, 1A2, 1B, 1C, 1C1, 1C2, 1D, 1D1, 1E2, 1K1, 1S, and 1S1 Turboshaft Engines
Applicability*9
This AD applies to Turbomeca S.A. Arriel 1A1, 1A2, 1B, 1C, 1C1, 1C2, 1D, 1D1, 1E2, 1K1, 1S, and 1S1 turboshaft engines if modified by Turbomeca Modification TU332 and fitted with modules M05 as listed by serial number in Figure 1 of Turbomeca S.A. Mandatory Service Bulletin (MSB) No. A292 72 0825, Version A, dated May 27, 2009. These engines are installed on, but not limited to, Eurocopter France AS350B, AS350BA, AS365N, AS350B1, AS350B2, Eurocopter Deutschland GmbH MBB-BK117-C1, Agusta A109K2, and Sikorsky S-76A+, S-76A++ and S-76C helicopters.
Compliance
You are responsible for having the actions required by this AD performed within the compliance times specified unless the actions have already been done. Initial Visual Inspection Before Further Flight (f) Before further flight: (1) Visually inspect the module M05 lubrication duct for oil leakage. Use paragraph 1.C.(1)(a), paragraph 2.A., and Figure 2 of Turbomeca S.A. MSB No. A292 72 0825, Version A, dated May 27, 2009, to do the inspection. (2) If oil leakage is found, repair the module M05 lubrication duct. Use paragraph 2.B.1, Figure 3, and Figure 4 in Turbomeca S.A. MSB No. A292 72 0825, Version A, dated May 27, 2009, to do the repair. Repetitive Visual Inspections (g) If no oil leakage is found, repeat the visual inspection every four flight hours, or after the last flight of each day, whichever comes first. (h) The actions required by paragraph (g) of this AD may be performed by the owner/operator holding at least a private pilot certificate, and must be entered into the aircraft records showing compliance with this AD in accordance with 14 CFR 43.9 and 14 CFR 91.417(a)(2)(v). Optional Terminating Action (i) As optional terminating action to the repetitive visual inspections in paragraph (g) of this AD, repair the affected modules M05 as specified in paragraph (f)(2) of this AD. Alternative Methods of
Unsafe condition
This AD results from reports of oil leaks from certain reduction gearbox (module M05) front casings. The engine manufacturer reported that the lubrication duct plug was not properly bonded/glued in place. This condition, if not corrected, could result in loss of the lubrication duct plug, followed by a rapid draining of the oil tank, without indication to the cockpit through low oil pressure warning. This condition can lead to uncommanded in-flight engine shutdown, possible engine fire, and an emergency autorotation landing.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1