Airworthiness directives › 2009-24-01
AD 2009-24-01 Airworthiness Directives; Pratt & Whitney JT8D-7, -7A, -7B, -9, -9A, -11, -15, and -17 Turbofan Engines
Applicability*9
This AD applies to Pratt & Whitney JT8D-7, -7A, -7B, -9, -9A, -11, -15, and -17 turbofan engines, with 2nd stage fan blades, part number (P/N) 433802, 645902, 759902, 695932, 678102, or 746402, installed. These engines are installed on, but not limited to, Boeing 727, 737, and McDonnell Douglas DC-9 series airplanes.
Compliance
You are responsible for having the actions required by this AD performed within the compliance times specified unless the actions have already been done. 2nd Stage Fan Blade Inspections (f) For 2nd stage fan blades, P/N 678102 and P/N 746402, perform an eddy current inspection (ECI) of the blade pin-root holes for cracks, and for 2nd stage fan blades, P/Ns 433802, 645902, 759902, and 695932, perform an ECI of the blade pin-root holes and perform an ultrasonic inspection (UI) of the blade root attachment for cracks, as follows: (1) Perform an inspection at the first disassembly of the 2nd stage fan rotor from the low-pressure (LP) compressor after accumulation of 3,000 cycles-in-service (CIS) since the last inspection of the blade root attachment, not to exceed 10,000 CIS since last inspection. (2) If the 2nd stage fan blades were new at their last installation onto the 2nd stage fan disk, inspect at the first disassembly of the 2nd stage fan rotor from the LP compressor after accumulating 3,000 cycles-since-new (CSN), not to exceed 10,000 CSN. (3) Thereafter, inspect the 2nd stage fan blades at each disassembly of the 2nd stage fan rotor from the LP compressor after accumulating 3,000 CIS, not to exceed 10,000 CIS since the last inspection. (4) Guidance on performing ECIs and UIs of the 2nd stage fan blade pin-root holes and blade root attachments can be found in Pratt & Whitney Maintenance Advisory Notice MAN-JT8D-1-08. Contact Pratt & Whitney, 400 Main St., East Hartford, CT 06108; telephone (860) 565-8770; fax (860) 565-4503, for a copy of this service information. (5) Remove from service before further flight any 2nd stage fan blades that are found cracked. Optional Terminating Action (g) For JT8D-9, -9A, -11, -15, and -17 engines, as optional terminating action to the repetitive inspections required by this AD, replace the affected 2nd stage fan blades with redesigned 2nd stage fan blades using Pratt & Whitney Service Bulletin No. 5866, Revision 2, dated October 20, 1998. Alternative Methods of
Unsafe condition
This AD results from reports of 10 fractures of 2nd stage fan blades since AD 87-14-01R1 became effective. We are issuing this AD to prevent uncontained failure of 2nd stage fan blades, which could result in damage to the airplane.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1