TrackAD

Airworthiness directives › 2009-26-15

AD 2009-26-15 Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes, and Model ERJ 190-100 LR, -100 IGW, -100 STD, -200 STD, -200 LR, and -200 IGW Airplanes

2010-02-04
2009-12-31
—
—
Airframe
—

Models named: ERJ 170-100 LR, -100 STD, -100 SE, -100 SU, -200 LR, -200 STD, -200 SU, ERJ 190-100 LR, -100 IGW, -200 IGW. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to EMBRAER Model ERJ 170-100 LR, -100 STD, -100 SE, -100 SU, -200 LR, -200 STD, and -200 SU airplanes, certificated in any category, serial numbers 17000156 through 17000169 inclusive; and Model ERJ 190-100 LR, -100 IGW, -100 STD, -200 STD, -200 LR, and -200 IGW airplanes, certificated in any category, serial numbers 19000047 through 19000089 inclusive.

Compliance

Unless already done, do the following actions. (1) Within 5,000 flight cycles after the effective date of this AD: Inspect the fasteners in bulkhead 1 of the left- and right-hand pylons for the presence of aluminum fasteners, in accordance with Part I of the Accomplishment Instructions of Embraer Service Bulletin 170-54-0007 or 190-54-0008, both dated December 21, 2007; as applicable. If no aluminum fastener is found, this AD requires no further action. (2) If any aluminum fastener is found, before further flight after the inspection required by paragraph (f)(1) of this AD: Replace any aluminum fastener with a titanium fastener in accordance with Part II of the Accomplishment Instructions of Embraer Service Bulletin 170-54-0007 or 190-54-0008, both dated December 21, 2007; as applicable. FAA AD Differences Note 1: This AD differs from the MCAI and/or service information as follows: No differences. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Kenny Kaulia, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 227-2848; fax (425) 227-1149. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq. ), the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Brazilian Airworthiness Directive 2008-09-02, effective September 30, 2008; MCAI Brazilian Airworthiness Directive 2008-10-04, effective November 10, 2008; and Embraer Service Bulletins 170-54-0007 and 190-54-0008, both dated December 21, 2007; for related information. Material Incorporated by Reference (i) You must use Embraer Service Bulletin 170-54-0007, dated December 21, 2007; or Embraer Service Bulletin 190-54-0008, dated December 21, 2007; as applicable; to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Empresa Brasileira de Aeronautica S.A. (EMBRAER), Technical Publications Section (PC 060), Av. Brigadeiro Faria Lima, 2170—Putim—12227-901 São Jose dos Campos—SP—BRASIL; telephone: +55 12 3927-5852 or +55 12 3309-0732; fax: +55 12 3927-7546; e-mail: distrib@embraer.com.br; Internet: http://www.flyembraer.com . (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html . Issued in Renton, Washington, on December 16, 2009. Stephen P. Boyd, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-30705 Filed 12-30-09; 8:45 am] BILLING CODE 4910-13-P

Required actions

Unless already done, do the following actions. (1) Within 5,000 flight cycles after the effective date of this AD: Inspect the fasteners in bulkhead 1 of the left- and right-hand pylons for the presence of aluminum fasteners, in accordance with Part I of the Accomplishment Instructions of Embraer Service Bulletin 170-54-0007 or 190-54-0008, both dated December 21, 2007; as applicable. If no aluminum fastener is found, this AD requires no further action. (2) If any aluminum fastener is found, before further flight after the inspection required by paragraph (f)(1) of this AD: Replace any aluminum fastener with a titanium fastener in accordance with Part II of the Accomplishment Instructions of Embraer Service Bulletin 170-54-0007 or 190-54-0008, both dated December 21, 2007; as applicable. FAA AD Differences Note 1: This AD differs from the MCAI and/or service information as follows: No differences. Other FAA AD Provisions (g) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Kenny Kaulia, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 227-2848; fax (425) 227-1149. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq. ), the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (h) Refer to MCAI Brazilian Airworthiness Directive 2008-09-02, effective September 30, 2008; MCAI Brazilian Airworthiness Directive 2008-10-04, effective November 10, 2008; and Embraer Service Bulletins 170-54-0007 and 190-54-0008, both dated December 21, 2007; for related information. Material Incorporated by Reference (i) You must use Embraer Service Bulletin 170-54-0007, dated December 21, 2007; or Embraer Service Bulletin 190-54-0008, dated December 21, 2007; as applicable; to do the actions required by this AD, unless the AD specifies otherwise. (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Empresa Brasileira de Aeronautica S.A. (EMBRAER), Technical Publications Section (PC 060), Av. Brigadeiro Faria Lima, 2170—Putim—12227-901 São Jose dos Campos—SP—BRASIL; telephone: +55 12 3927-5852 or +55 12 3309-0732; fax: +55 12 3927-7546; e-mail: distrib@embraer.com.br; Internet: http://www.flyembraer.com . (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221 or 425-227-1152. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html . Issued in Renton, Washington, on December 16, 2009. Stephen P. Boyd, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. E9-30705 Filed 12-30-09; 8:45 am] BILLING CODE 4910-13-P

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1