AD 2010-22-02 Airworthiness Directives; Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes

This AD applies to Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, certificated in any category, serial numbers 7003 and subsequent.

You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done. Airplane Flight Manual (AFM) Revision (g) Within 30 days after the effective date of this AD, revise the Limitations section, Normal Procedures section, and Abnormal Procedures section of the AFM by incorporating Canadair Regional Jet Temporary Revision (TR) RJ/186-1, dated August 24, 2010, into the applicable section of Canadair Regional Jet AFM, CSP A-012. Thereafter, except as provided by paragraph(s) of this AD, no alternative actions specified in Canadair Regional Jet TR RJ/186-1, dated August 24, 2010, may be approved. Note 1: The actions required by paragraph (g) of this AD may be done by inserting a copy of Canadair Regional Jet TR RJ/186-1, dated August 24, 2010, into the applicable section of the Canadair Regional Jet AFM, CSP A-012. When the TR has been included in the general revisions of the AFM, the general revisions may be inserted into the AFM, and the TR removed, provided that the relevant information in the general revision is identical to that in Canadair Regional Jet TR RJ/186-1, dated August 24, 2010. Deactivation of the Hydraulic System No. 3 Accumulator (h) Within 250 flight cycles after the effective date of this AD, deactivate the hydraulic system No. 3 accumulator, in accordance with Part A of the Accomplishment Instructions of Bombardier Alert Service Bulletin A601R-29-031, Revision A, dated March 26, 2009. Doing the removal of the hydraulic system No. 3 accumulator in paragraph (j) of this AD is an alternate method of compliance with the requirements of this paragraph. The actions in this paragraph apply to all accumulators in hydraulic system No. 3. Removal of the Hydraulic System No. 2 Accumulator (i) Within 500 flight cycles after the effective date of this AD, remove the hydraulic system No. 2 accumulator, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R-29-032, Revision A, dated January 26, 2010. The actions in this paragraph apply to all accumulators in hydraulic system No. 2. Optional Removal of the Hydraulic System No. 3 Accumulator (j) Removal of the hydraulic system No. 3 accumulator, in accordance with Part B of the Accomplishment Instructions of Bombardier Alert Service Bulletin A601R-29-031, Revision A, dated March 26, 2009, is an alternate method of compliance with the requirements of paragraph (h) of this AD. Initial and Repetitive Ultrasonic Inspection of Hydraulic System No. 1, Inboard Brake, and Outboard Brake Accumulators (k) For hydraulic system No. 1, inboard brake, and outboard brake accumulators having P/N 601R75138-1 (08-60163-001 or 08-60163-002): At the applicable compliance times specified in paragraph (l) of this AD, do the inspections required by paragraphs (k)(1) and (k)(2) of this AD. Repeat the inspections for each accumulator having P/N 601R75138-1 (08-60163-001 or 08-60163-002) thereafter at intervals not to exceed 500 flight cycles until the replacement specified in this paragraph is done or the replacement specified in paragraph (m) of this AD is done. If any crack is found, before further flight, replace the accumulator with a new accumulator having part number (P/N) 601R75138-1 (08-60163-001 or 08-60163-002) and having the letter “T” after the serial number on the identification plate, in accordance with the Accomplishment Instructions of the applicable service bulletin identified in Table 1 or Table 2 of this AD. (1) Do an ultrasonic inspection for cracks on each accumulator, in accordance with Part B of the Accomplishment Instructions of the applicable service bulletin identified in Table 1 of this AD. Table 1—Bombardier Service Information for Accumulator Inspection Accumulator Document Revision Date Hydraulic System No. 1 Bombardier Alert Service Bulletin A601R-29-029, including Appendix A, dated October 18, 2007 B May 11, 2010. Inboard and Outboard Brake Bombardier Alert Service Bulletin A601R-32-103, including Appendix A, Revision A, dated October 18, 2007 D May 11, 2010. (2) Do an ultrasonic inspection for cracks on the screw cap, in accordance with the Accomplishment Instructions of the applicable service bulletin identified in Table 2 of this AD. Table 2—Bombardier Service Information for Screw Cap Inspection Accumulator Document Revision Date Hydraulic System No. 1 Bombardier Service Bulletin 601R-29-033, including Appendix A, dated May 5, 2009 A May 11, 2010. Inboard and Outboard Brake Bombardier Service Bulletin 601R-32-106, including Appendix A A May 11, 2010. (l) For hydraulic system No. 1, inboard brake, and outboard brake accumulators having P/N 601R75138-1 (08-60163-001 or 08-60163-002): Do the inspections specified in paragraph (k) of this AD at the applicable time in paragraph (l)(1), (l)(2), and (l)(3) of this AD. (1) For any accumulator not having the letter “T” after the serial number on the identification plate and with more than 4,500 flight cycles on the accumulator as of the effective date of this AD: Inspect within 500 flight cycles after the effective date of this AD. (2) For any accumulator not having the letter “T” after the serial number on the identification plate and with 4,500 flight cycles or less on the accumulator as of the effective date of this AD: Inspect prior to the accumulation of 5,000 flight cycles on the accumulator. (3) If it is not possible to determine the flight cycles accumulated for any accumulator not having the letter “T” after the serial number on the identification plate: Inspect within 500 flight cycles after the effective date of this AD. Note 2: For any accumulator having P/N 601R75138-1 (08-60163-001 or 08-60163-002) and the letter “T” after the serial number on the identification plate, or if the accumulator P/N is not listed in paragraph (k) of this AD, the inspection specified in paragraph (k) of this AD is not required. Optional Replacement of the Hydraulic System No. 1, Inboard Brake, and Outboard Brake Accumulators (m) Replacing any hydraulic system No. 1, inboard brake, or outboard brake accumulator having P/N 601R75138-1 (08-60163-001 or 08-60163-002), with a new accumulator having P/N 601R75139-1 (11093-4), in accordance with the Accomplishment Instructions of the applicable service bulletin identified in Table 3 of this AD, is a terminating action for the inspections in paragraph (k) of this AD for that accumulator. Table 3—Bombardier Service Information for Accumulator Replacement Accumulator Document Revision Date Hydraulic System No. 1 Bombardier Service Bulletin 601R-29-035 Original May 11, 2010. Inboard and Outboard Brake Bombardier Service Bulletin 601R-32-107 A June 17, 2010. Credit for Actions Accomplished in Accordance With Previous Service Information (n) Deactivating the hydraulic system No. 3 accumulator before the effective date of this AD in accordance with Part A of the Accomplishment Instructions of Bombardier Alert Service Bulletin A601R-29-031, dated December 23, 2008, is acceptable for compliance with the requirements of paragraph (h) of this AD. (o) Removing the hydraulic system No. 2 accumulator in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R-29-032, dated November 12, 2009, before the effective date of this AD is acceptable for compliance with the requirements of paragraph (i) of this AD. (p) Removing the hydraulic system No. 3 accumulator in accordance with Part B of the Accomplishment Instructions of Bombardier Service Bulletin A601R-29-031, dated December 23, 2008, before the effective date of this AD is acceptable for compliance with the requirements of paragraph (j) of this AD. (q) An ultrasonic inspection for cracks done before the effective date of this AD in accordance with Part B of the Accomplishment Instructions of the applicable service bulletin identified in Table 4 of this AD, or the Accomplishment Instructions of the applicable service bulletin identified in Table 5 of this AD, is acceptable for compliance with the corresponding ultrasonic inspection required by paragraph (k) of this AD. Table 4— Bombardier Credit Service Information for Accumulator Inspection Document Revision Date Bombardier Alert Service Bulletin A601R-29-029 Original October 18, 2007. Bombardier Alert Service Bulletin A601R-29-029 A November 12, 2009. Bombardier Alert Service Bulletin A601R-32-103 Original November 21, 2006. Bombardier Alert Service Bulletin A601R-32-103 A March 7, 2007. Bombardier Alert Service Bulletin A601R-32-103 B October 18, 2007. Bombardier Alert Service Bulletin A601R-32-103 C February 26, 2009. Table 5— Bombardier Credit Service Information for Screw Cap Inspection Document Revision Date Bombardier Service Bulletin 601R-29-033 Original May 5, 2009. Bombardier Service Bulletin 601R-32-106 Original May 5, 2009. (r) Replacing any hydraulic system No. 1, inboard brake, or outboard brake accumulator before the effective date of this AD in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R-32-107, dated May 11, 2010, is acceptable for compliance with the corresponding requirements of paragraph (m) of this AD. FAA AD Differences Note 3: This AD differs from the MCAI and/or service information as follows: (1) This AD does not require the removal of the hydraulic system No. 3 accumulator, or replacement of the hydraulic system No. 1, inboard brake, and outboard brake accumulators, in Part IV and Part VII of the Canadian Airworthiness Directive CF-2010-24, dated August 3, 2010. (2) The actions specified in Canadian Airworthiness Directive CF-2010-24, dated August 3, 2010, apply only to Tactair accumulators. The actions required by paragraphs (h) and (i) of this AD apply to all accumulators in the positions specified in paragraphs (h) and (i) of this AD. Other FAA AD Provisions (s) The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE-170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, New York, 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC on any airplane to which the AMOC applies, notify your principal maintenance inspector (PMI) or principal avionics inspector (PAI), as appropriate, or lacking a principal inspector, your local Flight Standards District Office. The AMOC approval letter must specifically reference this AD. (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they are approved by the State of Design Authority (or their delegated agent). You are required to assure the product is airworthy before it is returned to service. (3) Reporting Requirements: For any reporting requirement in this AD, under the provisions of the Paperwork Reduction Act (44 U.S.C. 3501 et seq. ), the Office of Management and Budget (OMB) has approved the information collection requirements and has assigned OMB Control Number 2120-0056. Related Information (t) Refer to MCAI Canadian Airworthiness Directive CF-2010-24, dated August 3, 2010; Canadair Regional Jet Temporary Revision RJ/186-1, dated August 24, 2010; and the service bulletins listed in Table 6 of this AD; for related information. Table 6—Bombardier Service Information Document Revision Date Bombardier Alert Service Bulletin A601R-29-029 B May 11, 2010. Bombardier Alert Service Bulletin A601R-29-031 A March 26, 2009. Bombardier Alert Service Bulletin A601R-32-103 D May 11, 2010. Bombardier Service Bulletin 601R-29-032 A January 26, 2010. Bombardier Service Bulletin 601R-29-033 A May 11, 2010. Bombardier Service Bulletin 601R-29-035 Original May 11, 2010. Bombardier Service Bulletin 601R-32-106 A May 11, 2010. Bombardier Service Bulletin 601R-32-107 A June 17, 2010. Material Incorporated by Reference (u) You must use Canadair Regional Jet Temporary Revision RJ/186-1, dated August 24, 2010, to the Canadair Regional Jet Airplane Flight Manual, CSP A-012, and the service information identified in Table 7 of this AD to do the actions required by this AD, unless the AD specifies otherwise. If you accomplish the optional terminating actions specified in this AD, you must use the service information identified in Table 8 of this AD to perform those actions, unless the AD specifies otherwise. Table 7—Material Incorporated By Reference for Actions Required in This AD Document Revision Date Bombardier Alert Service Bulletin A601R-29-029, including Appendix A, dated October 18, 2007 .* B May 11, 2010. Bombardier Alert Service Bulletin A601R-29-031 A March 26, 2009. Bombardier Alert Service Bulletin A601R-32-103, including Appendix A, Revision A, dated October 18, 2007.* D May 11, 2010. Bombardier Service Bulletin 601R-29-032 A January 26, 2010. Bombardier Service Bulletin 601R-29-033, including Appendix A, dated May 5, 2009 .* A May 11, 2010. Bombardier Service Bulletin 601R-32-106, including Appendix A .* A May 11, 2010. (* In Appendix A to these documents, the document number is shown only on page A1 of these appendices.) Table 8—Material Incorporated by Reference for the Optional Actions in This AD Document Revision Date Bombardier Alert Service Bulletin A601R-29-031 A March 26, 2009. Bombardier Service Bulletin 601R-29-035 Original May 11, 2010. Bombardier Service Bulletin 601R-32-107 A June 17, 2010. (1) The Director of the Federal Register approved the incorporation by reference of this service information under 5 U.S.C. 552(a) and 1 CFR part 51. (2) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; e-mail thd.crj@aero.bombardier.com; Internet http://www.bombardier.com. (3) You may review copies of the service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington. For information on the availability of this material at the FAA, call 425-227-1221. (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Issued in Renton, Washington, on October 7, 2010. Ali Bahrami, Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2010-26225 Filed 10-19-10; 8:45 am] BILLING CODE 4910-13-P