TrackAD

Airworthiness directives › 2011-23-04

AD 2011-23-04 Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines

2011-12-12
2011-11-07
—
—
Engine
—

Applicability*9

This AD applies to General Electric (GE) CF6-45A, CF6-45A2, CF6-50A, CF6-50C, CF6-50CA, CF6-50C1, CF6-50C2, CF6-50C2B, CF6-50C2D, CF6-50E, CF6-50E1, CF6-50E2, CF6-50E2B, CF6-80A, CF6-80A1, CF6-80A2, and CF6-80A3 turbofan engines, including engines marked on the engine data plate as CF6-50C2-F and CF6-50C2-R, with left-hand side links part numbers (P/Ns) 9204M94P01, 9204M94P03, 9346M99P01, and 9346M99P03, and right-hand side links, P/Ns 9204M94P02, 9204M94P04, 9346M99P02, and 9346M99P04, installed on the forward engine mount assembly (also known as Configuration 2).

Compliance

You are responsible for having the actions required by this AD performed at every exposure of the side link. Inspecting and Stripping and Reapplying the Sermetel W Coating on the Side Links (f) Inspect, strip, and reapply the Sermetel W coating on each side link at every exposure of the side link. Use the following GE service bulletins (SBs): (1) For CF6-45/-50 series engines, use paragraphs 3.A. through 3.E. of the Accomplishment Instructions of CF6-50 S/B 72-1255, Revision 1, dated June 17, 2009. (2) For CF6-80A series engines, use paragraphs 3.A. through 3.E. of the Accomplishment Instructions of CF6-80A S/B72-0797, Revision 1, dated June 17, 2009. Definition of Exposure of Side Link (g) A side link is exposed when one or more bolts that attach the side links to the fan frame-front high-pressure compressor case are removed or when the bolt attaching the side link to the mount platform is removed. Alternative Methods of

Unsafe condition

This AD results from a report that GE had omitted two affected side link part numbers from the applicability of the original AD. We are issuing this AD to include those part numbers and to prevent failure of the side links and possible engine separation from the airplane.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1