Airworthiness directives › 2012-01-08
AD 2012-01-08 Airworthiness Directives; 328 Support Services GmbH Airplanes
Models named: 328-100, 328-300. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Model 328-100 and 328-300 airplanes; certificated in any category; all serial numbers.
Compliance
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Required actions
Within 100 flight hours after the effective date of this AD: Revise the airplane maintenance program by incorporating the applicable CMR tasks identified in table 1 of this AD. Table 1—CMR Tasks Model— Task No.— Task description— Identified in— 328-100 airplanes Task 27-10-00-09 Visual Check of Mechanical Linkages: Aileron Trim Tab to Actuator 328 Support Services Dornier 328 Certification Maintenance Requirements Document TM-CMR-010793-ALL, Revision 13, dated April 30, 2007. 328-100 airplanes Task 27-20-00-09 Visual Check of Mechanical Linkages: Rudder Trim Tab/Spring Tab to Actuator 328 Support Services Dornier 328 Certification Maintenance Requirements Document TM-CMR-010793-ALL, Revision 13, dated April 30, 2007. 328-100 airplanes Task 27-30-00-13 Visual Check of Mechanical Linkages: Elevator Trim Tabs to Actuator 328 Support Services Dornier 328 Certification Maintenance Requirements Document TM-CMR-010793-ALL, Revision 13, dated April 30, 2007. 328-300 airplanes Task 27-10-00-13 Visual Check of Linkage: Aileron Trim Tab to Actuator 328 Support Services Dornier 328JET Certification Maintenance Requirements Document TM-CMR-010599-ALL, Revision 2, dated May 1, 2007. 328-300 airplanes Task 27-20-00-11 Visual Check of Linkage: Rudder Trim Tab/Spring Tab 328 Support Services Dornier 328JET Certification Maintenance Requirements Document TM-CMR-010599-ALL, Revision 2, dated May 1, 2007. 328-300 airplanes Task 27-30-00-14 Visual Check of Linkage: Elevator Trim Tabs to Actuator 328 Support Services Dornier 328JET Certification Maintenance Requirements Document TM-CMR-010599-ALL, Revision 2, dated May 1, 2007.
Unsafe condition
This AD was prompted by a manufacturer safety analysis review on flight control which resulted in recommendations for reduced repetitive inspection intervals for the flight controls certification maintenance requirements (CMR) of the tab-to-actuator linkage. We are issuing this AD to prevent failure of these components or their constituent parts which could lead to reduced control of the airplane.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1