TrackAD

Airworthiness directives › 2012-04-04

AD 2012-04-04 Airworthiness Directives; Pratt & Whitney Division Turbofan Engines

2012-04-05
2012-03-01
39-16960
FAA-2011-0944
Engine
—

Applicability*9

This AD applies to all Pratt & Whitney Division PW4050, PW4052, PW4056, PW4060, PW4060A, PW4060C, PW4062, PW4062A, PW4152, PW4156, PW4156A, PW4158, PW4160, PW4460, PW4462, and PW4650 turbofan engines, including models with any dash number suffix, with a Pratt & Whitney fuel metering unit (FMU) part number (P/N) 53T335 (HS 801000-1), 55T423 (HS 801000-2), or 50U150 (HS 801000-3) installed.

Compliance

At the next shop visit after the effective date of this AD, remove FMU P/Ns 53T335 (HS 801000-1), 55T423 (HS 801000-2), and 50U150 (HS 801000-3) and install an FMU that incorporates the modification in paragraphs 3.C through 3.E of the Accomplishment Instructions of Hamilton Sundstrand Alert Service Bulletin (ASB) No. JFC131-2-73-A24, Revision 1, dated May 18, 2011.

Required actions

After three years from the effective date of this AD, do not install or reinstall an FMU P/N 53T335 (HS 801000-1), 55T423 (HS 801000-2), or 50U150 (HS 801000-3) onto any engine.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1