TrackAD

Airworthiness directives › 2012-04-15

AD 2012-04-15 Airworthiness Directives; Pratt & Whitney Turbofan Engines

Superseded. This directive was replaced by AD 2021-09-10. Work to the current one.
2012-04-23
2012-03-19
—
—
Engine
2021-09-10

Applicability*9

This AD applies to Pratt & Whitney (PW) JT9D-3A, -7, -7A, -7H, -7AH, -7F, -7J, -20J, -59A, -70A, -7Q, -7Q3, -7R4D, -7R4D1, -7R4E, -7R4E1, -7R4E4, -7R4G2, and -7R4H1 series turbofan engines.

Compliance

Within the next 30 days after the effective date of this AD, add the following section to the Airworthiness Limitations Section (ALS) of your copy of the manufacturer's Instructions for Continued Airworthiness (ICA) and, for air carrier operations, to your continuous airworthiness air carrier maintenance program: BILLING CODE 4910-13-P ER19MR12.000 ER19MR12.001 BILLING CODE 4910-13-C (g) Except as provided in paragraph (h) of this AD, and notwithstanding contrary provisions in section 43.16 of the Code of Federal Regulations (14 CFR 43.16), these mandatory inspections shall be performed only in accordance with the ALS of the manufacturer's ICA.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done.

Affected ADs

This AD supersedes AD 2007-05-17, Amendment 39-14978 (72 FR 10350, March 8, 2007).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1