TrackAD

Airworthiness directives › 2012-05-02

AD 2012-05-02 Airworthiness Directives; The Boeing Company Airplanes

2012-05-10
2012-04-05
39-16974
FAA-2010-0858
Airframe
—

Models named: 737-600, -700, -700C, -800, -900 series. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes; certificated in any category; as identified in Boeing Service Bulletin 737-78-1082, dated March 25, 2010.

Compliance

You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.

Required actions

Except as required by paragraph (m) of this AD: Within 24 months after the effective date of this AD, modify the thrust reverser inner wall, in accordance with the Accomplishment Instructions of Boeing Service Bulletin 737-78-1082, dated March 25, 2010.

Unsafe condition

This AD results from reports of heat damage to the inner wall of the thrust reversers. The Federal Aviation Administration is issuing this AD to detect and correct such heat damage, which could result in separation of adjacent components and consequent structural damage to the airplane, damage to other airplanes, and injury to people on the ground.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1