TrackAD

Airworthiness directives › 2013-02-09

AD 2013-02-09 Airworthiness Directives; BAE SYSTEMS (OPERATIONS) LIMITED Airplanes

2013-03-08
2013-02-01
—
—
Airframe
—

Models named: BAe 146-100A, -200A, -300A, Avro 146-RJ70A, 146-RJ85A, 146-RJ100A. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all BAE SYSTEMS (OPERATIONS) LIMITED Model BAe 146-100A, -200A, and -300A airplanes; and Model Avro 146-RJ70A, 146-RJ85A, and 146-RJ100A airplanes; certificated in any category; all serial numbers.

Compliance

You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.

Required actions

Within 12 months after the effective date of this AD: Do a detailed inspection of the end caps on the anti-icing piccolo tube for lost and loose end caps, in accordance the Accomplishment Instructions of BAE SYSTEMS (OPERATIONS) LIMITED Inspection Service Bulletin ISB.30-025, dated April 19, 2011.

Unsafe condition

This AD was prompted by a report of loss of the end caps on the anti-icing piccolo tube of the wing leading edge. We are issuing this AD to detect and correct lost and loose end caps on the anti-icing piccolo tube, and ice accretion on the wing leading edge or run-back ice, which could lead to a reduction in the stall margin on approach and loss of controllability of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1