Airworthiness directives › 2013-02-10
AD 2013-02-10 Airworthiness Directives; Airbus Airplanes
Models named: A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to all airplanes identified in paragraphs (c)(1) and (c)(2) of this AD, certificated in any category. (1) Airbus Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes. (2) Airbus Model A340-211, -212, -213, -311, -312, and -313 airplanes.
Compliance
You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Required actions
For Model A330-201, -202, -203, -223, -223F, -243, -243F, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes, having manufacturer serial number (MSN) 0002 to 1113 inclusive, except MSN 0996, 1039, 1054, 1059, 1105, 1107, 1108 and 1112; and Model A340-211, -212, -213, -311, -312, and -313 airplanes: Within 72 months after the effective date of this AD, accomplish the actions in paragraphs (g)(1) and (g)(2) of this AD, in accordance with the Accomplishment Instructions of Airbus Mandatory Service Bulletin A330-53-3186, Revision 01, dated April 7, 2011 (for Model A330 airplanes); or A340-53-4185, Revision 01, dated April 7, 2011 (for Model A340 airplanes). (1) Do a detailed inspection of the 21 rods of the belly fairing identified in Airbus Mandatory Service Bulletin A330-53-3186, Revision 01, dated April 7, 2011 (for Model A330 airplanes); or A340-53-4185, Revision 01, dated April 7, 2011 (for Model A340 airplanes); for rod manufacturer identification. A review of airplane maintenance records is acceptable in lieu of this inspection if the manufacturer of the rods can be conclusively determined from that review. (2) If the rod manufacturer is found to be Technical Airborne Components Industries (TAC), or if the manufacturer cannot be identified, do a high frequency eddy current (HFEC) inspection for cracking of the crimped end of the rod body and, if any crack is found, before further flight, do all applicable related investigative and corrective actions.
Unsafe condition
This AD was prompted by a report of a manufacturing defect in certain rods installed in the belly fairing, which could lead to cracks at the crimped end of the rod. We are issuing this AD to detect and correct cracking of the rods, which could result in rupture of rods that attach the belly fairing to the airframe, leading to separation of the belly fairing from the airframe, and consequent damage to airplane structure and airplane systems.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1