TrackAD

Airworthiness directives › 2013-07-10

AD 2013-07-10 Airworthiness Directives; International Aero Engines AG Turbofan Engines

2013-05-20
2013-04-15
39-17414
FAA-2012-1217
Engine
—

Applicability*9

This AD applies to International Aero Engines AG (IAE), V2525-D5 and V2528-D5 turbofan engines, serial numbers V20001 through V20285, with No. 4 bearing internal scavenge tube, part number (P/N) 2A2074-01, and No. 4 bearing external scavenge tube, P/N 6A5254, installed.

Compliance

Replace the No. 4 bearing internal scavenge tube, P/N 2A2074-01, at each combustor module-level exposure after the No. 4 bearing internal scavenge tube has accumulated 10,000 flight cycles (FCs) since new. If the FCs on the tube cannot be confirmed, replace the tube at each combustor module-level exposure.

Required actions

At each installation, check the alignment of the No. 4 bearing external scavenge tube, P/N 6A5254, in accordance with paragraph 3.A. PART 2, of IAE Non-Modification Service Bulletin (NMSB) No. V2500-ENG-72-0630, Revision 1, dated September 20, 2012. If the tube is misaligned, replace with a new tube.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1