TrackAD

Airworthiness directives › 2013-16-10

AD 2013-16-10 Airworthiness Directives; Hamilton Standard Division and Hamilton Sundstrand Corporation Propellers

2013-10-25
2013-10-25
39-17548
FAA-2013-0262
Prop
—

Required actions

For Hamilton Standard Division propeller models 6/5500/F and 24PF and Hamilton Sundstrand Corporation propeller models 14RF-19, 14RF-37, 14SF-11, 14SF-15, 14SF-23, 14SF-17, 14SF-19, 247F-1, 247F-1E, 247F-3, 568F-1, 568F-5, and 568F-7, that do not have an approved update to the ALS, within one year after the effective date of this AD, perform an MI on the blades and hubs no later than seven years after the DSI. The DSI will begin at initial installation after the most recent MI or initial installation after production. Guidance on the inspections can be found in the applicable Hamilton Standard Division models/manuals 6/5500/F/P5190 and 24PF/61-12-01, and Hamilton Sundstrand Corporation models/manuals 14RF-19/P5199, 14RF-37/P5209, 14SF-11/P5196, 14SF-15/P5197, 14SF-23/P5197, 14SF-17/P5198, 14SF-19/P5198, 247F-1/P5202, 247F-1E/P5204, 247F-3/P5205, 568F-1/P5214, 568F-5/P5203, and 568F-7/P5211. Issued in Burlington, Massachusetts, on October 15, 2013. Colleen M. D'Alessandro, Assistant Directorate Manager, Engine & Propeller Directorate, Aircraft Certification Service. [FR Doc. 2013-25108 Filed 10-24-13; 8:45 am] BILLING CODE 4910-13-P

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1