TrackAD

Airworthiness directives › 2013-16-15

AD 2013-16-15 Airworthiness Directives; General Electric Company Turbofan Engines

2013-09-23
2013-08-19
39-17553
FAA-2013-0195
Engine
—

Applicability*9

This AD applies to all General Electric Company (GE) model GEnx-2B67B turbofan engines with booster anti-ice (BAI) air duct, part number (P/N) 2469M32G01, and support bracket, P/N 2469M46G01, installed.

Compliance

(1) Perform an initial visual inspection of the BAI air duct, P/N 2469M32G01, for cracks prior to accumulating 400 cycles since new (CSN). (2) Thereafter, repeat the visual inspection within every 100 cycles since last inspection. (3) If cracks in the BAI air duct are found during any inspection required by this AD, remove the BAI air duct from service.

Required actions

As mandatory terminating action to the repetitive inspection requirement of this AD, at the next removal of BAI air duct, P/N 2469M32G01, or if the BAI air duct is found cracked, after the effective date of this AD, do the following: (1) Install new BAI air duct support brackets, P/Ns 2550M03G01, 2548M66G01, 2548M67P01, 2550M18G01, and 2550M17P01. (2) Replace the BAI air duct with one that is eligible for installation.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1