TrackAD

Airworthiness directives › 2013-25-01

AD 2013-25-01 Airworthiness Directives; DASSAULT AVIATION Airplanes

2013-12-24
2013-12-09
39-17697
FAA-2013-0979
Airframe
—

Models named: Falcon 10. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to DASSAULT AVIATION Model Falcon 10 airplanes, certificated in any category, all serial numbers.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 65 days after the effective date of this AD, do a detailed inspection for cracking of ribs 1 and 3 of the left- and right-hand inboard flaps, in accordance with the Accomplishment Instructions of Dassault Mandatory Service Bulletin F10-318, dated October 30, 2013. If any cracking is found, before further flight, replace the inboard flap with a crack-free serviceable flap, in accordance with the Accomplishment Instructions of Dassault Mandatory Service Bulletin F10-318, dated October 30, 2013.

Unsafe condition

This AD was prompted by reports of cracking found on the inboard end plate (rib) of the right-hand inboard flap. We are issuing this AD to detect and correct such cracking, which could lead to complete fracture of the rib and loss of integrity of the flap structure, resulting in loss of control of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1