Airworthiness directives › 2014-16-10
AD 2014-16-10 Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Applicability*9
This AD applies to Rolls-Royce plc (RR) model RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines, with low-pressure (LP) compressor blade, part numbers (P/Ns) FK23411, FK25441, FK25968, FW11901, FW15393, FW23643, FW23741, FW23744, KH23403, or KH23404, installed.
Compliance
If you performed a UI of an affected LP compressor blade before the effective date of this AD using RR NMSB No. RB.211-72-G702, dated May 23, 2011; or RR NMSB No. RB.211-72-G872, Revision 2, dated March 8, 2013, or earlier revisions; or RR NMSB No. RB.211-72-H311, dated March 8, 2013; or Engine Manual E-Trent-1RR, Task 72-31-11-200-806, you have met the initial inspection requirements of this AD. However, you must still comply with the repetitive 2,400 CSLI requirement of this AD.
Required actions
The Manager, Engine Certification Office, may approve AMOCs for this AD. Use the procedures found in 14 CFR 39.19 to make your request.
Unsafe condition
Unless already done, do the following actions. (1) Ultrasonic Inspection (UI) of LP Compressor Blade (i) After the effective date of this AD, ultrasonically inspect each LP compressor blade before the blade exceeds 3,600 cycles since new (CSN) or before further flight, whichever occurs later. Repeat the UI of the blade every 2,400 cycles since last inspection (CSLI). (ii) For any LP compressor blade that exceeds 2,200 CSLI on the effective date of this AD, inspect the blade before exceeding 3,000 CSLI or before further flight, whichever occurs later. Thereafter, perform the repetitive inspections required by this AD. (iii) Use paragraph 3, excluding subparagraphs 3.A.(9), 3.B.(5), 3.C.(4), 3.D.(3), 3.E.(5), 3.F.(10), and 3.G.(7), of RR Alert Non-Modification Service Bulletin (NMSB) RB.211-72-AH465, dated July 15, 2013, to perform the inspections required by this AD. (2) Use of Replacement Blades LP compressor blades, P/Ns FK23411, FK25441, FK25968, FW11901, FW15393, FW23643, FW23741, FW23744, KH23403, or KH23404, that have accumulated at least 3,600 CSN or 2,400 CSLI are eligible for installation if the blade has passed the UI required by this AD.
Affected ADs
This AD supersedes AD 2013-12-01, Amendment 39-17478 (78 FR 37703, June 24, 2013).
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1