Airworthiness directives › 2014-20-04
AD 2014-20-04 Airworthiness Directives; Airbus Airplanes
Models named: A318-111, -112, -121, -122, A319-111, -113, -114, -115, -131, -132. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to the Airbus airplanes specified in paragraphs (c)(1) through (c)(4) of this AD, certificated in any category, all manufacturer serial numbers. (1) Airbus Model A318-111, -112, -121, and -122 airplanes. (2) Airbus Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes. (3) Airbus Model A320-111, -211, -212, -214, -231, -232, and -233 airplanes. (4) Airbus Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
This paragraph restates the requirements of paragraph (a) of AD 94-12-03, Amendment 39-8930 (59 FR 28763, June 3, 1994), with new service information. For Model A320-111, -211, and -231 series airplanes, manufacturer serial numbers 003 through 092 inclusive: Prior to the accumulation of 12,000 total landings on the airplane, or within 300 days after January 10, 1994 (the effective date of AD 93-24-11, Amendment 39-8760 (58 FR 64875, December 10, 1993)), whichever occurs later, modify the belly fairing structure, in accordance with the Accomplishment Instructions of an Airbus service bulletin specified in paragraph (g)(1), (g)(2), or (g)(3) of this AD. As of the effective date of this AD, use only the Airbus service bulletin specified in paragraph (g)(3) of this AD. (1) Airbus Industrie Service Bulletin A320-53-1014, dated June 25, 1992. (2) Airbus Industrie Service Bulletin A320-53-1014, Revision 1, dated May 26, 1993. (3) Airbus Service Bulletin A320-53-1014, Revision 2, dated September 1, 1994.
Unsafe condition
This AD was prompted by reports of cracks at the lower riveting of the four titanium angles that connect the belly fairing to the keel beam side panels on both sides of the fuselage. We are issuing this AD to detect and correct cracking of the titanium angles that connect the belly fairing to the keel beam side panels on both sides of the fuselage, which could affect the structural integrity of the airplane.
Affected ADs
This AD replaces AD 94-12-03, Amendment 39-8930 (59 FR 28763, June 3, 1994).
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1