TrackAD

Airworthiness directives › 2014-24-08

AD 2014-24-08 Airworthiness Directives; Rolls-Royce plc Turbofan Engines

Superseded. This directive was replaced by AD 2017-24-08. Work to the current one.
2015-01-06
2014-12-02
—
—
Engine
2017-24-08

Applicability*9

This AD applies to all Rolls-Royce plc (RR) RB211-535E4-37, RB211-535E4-B-37, and RB211-535E4-C-37 turbofan engines with low-pressure (LP) fuel filter-to-high-pressure (HP) fuel pump tube assembly, part number (P/N) UL16692, AE709623-1, 163521538, or 163521545, installed.

Compliance

For the purpose of this AD, an “engine shop visit” is the induction of an engine into the shop for maintenance.

Required actions

The Manager, Engine Certification Office, may approve AMOCs for this AD. Use the procedures found in 14 CFR 39.19 to make your request. You may email your request to: ANE-AD-AMOC@faa.gov.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done. (1) After the effective date of this AD, remove from service all LP fuel filter-to-HP fuel pump tube assemblies, P/Ns UL16692, AE709623-1, 163521538, and 163521545, at the next part removal or during the next engine shop visit, whichever occurs first. (2) Install LP fuel filter-to-HP fuel pump tube assemblies eligible for installation.

Affected ADs

This AD supersedes AD 98-07-07, Amendment 39-10426 (63 FR 18119, April 14, 1998).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1