AD 2015-02-08 Airworthiness Directives; Rolls-Royce Corporation Turboprop and Turbofan Engines (Type Certificate Previously Held by Allison Engine Company)

This AD applies to all Rolls-Royce Corporation (RRC) AE 2100D2, 2100D2A, 2100D3, and 2100P turboprop engines and AE 3007A1, A1/1, A1/3, A1E, A1P, A2, A3, C, C1, and C2 turbofan engines: (1) With an installed 1st stage gas generator turbine wheel, part number (P/N) 23079946, 23088906, or 23089692, all serial numbers (S/Ns) listed in Table 2 and Table 3 of RRC Alert Service Bulletin (ASB) No. AE 2100D2-A-72-085, dated July 25, 2013; and in Table 2 and Table 3 of RRC ASB No. AE 2100D3-A-72-277, dated July 25, 2013. (2) With an installed high-pressure turbine (HPT) stage 1 or HPT stage 2 wheel, P/N 23079946, 23088906, 23088784, 23084520, 23084781, 23088817, or 23088818, all S/Ns listed in Table 1 through Table 7 of RRC ASB No. AE 3007A-A-72-407, Revision 1, dated August 29, 2014, except those S/Ns excluded by Table 1, Table 2, Table 4, and Table 5 of RRC ASB No. AE 3007A-A-72-407, Revision 1, dated August 29, 2014. (3) With an installed HPT stage 2 wheel, P/N 23084520 or 23088818, all S/Ns listed in Table 1 and Table 2 of RRC ASB No. AE 3007C-A-72-316, dated December 6, 2013, except those S/Ns excluded by Table 1 of RRC ASB No. AE 3007C-A-72-316, dated December 6, 2013. (4) With an installed 4th stage turbine wheel, P/N 23083536, all S/Ns listed in Table 2 of RRC ASB No. AE 2100P-A-72-019, dated July 25, 2013.

Thirty days after the effective date of this AD, do not install an affected wheel, as identified in paragraph (c) of this AD, into any RRC AE 3007C2 engine.

For the purpose of this AD, an “engine shop visit” is the induction of an engine into the shop for maintenance involving the separation of pairs of major mating engine flanges, except that the separation of engine flanges solely for the purposes of transportation without subsequent engine maintenance is not an engine shop visit.

Comply with this AD within the compliance times specified, unless already done. (1) For all RRC AE 3007A1, A1/1, A1/3, A1E, A1P, and A3 series engines with an HPT stage 2 wheel P/N and S/N identified in RRC ASB No. AE 3007A-A-72-408, Revision 1, dated August 29, 2014, at each shop visit after the effective date of this AD, eddy current inspect the bore of the affected HPT stage 2 wheels. Use RRC ASB No. AE 3007A-A-72-408, Revision 1, August 29, 2014, to do the inspection. Do not return to service any wheel that fails the inspection required by this AD. (2) Thirty days after the effective date of this AD, do not return to service any engine that has a turbine wheel with a P/N and an S/N listed in any of the following RRC ASBs whose wheel life exceeds the new life limits identified in the following RRC ASBs: (i) RRC ASB No. AE 2100D2-A-72-085, dated July 25, 2013; (ii) RRC ASB No. AE 2100D3-A-72-277, dated July 25, 2013; (iii) RRC ASB No. AE 2100P-A-72-019, dated July 25, 2013; (iv) RRC ASB No. AE 3007A-A-72-407, Revision 1, dated August 29, 2014; or (v) RRC ASB No. AE 3007C-A-72-316, dated December 6, 2013.

None.