TrackAD

Airworthiness directives › 2015-09-05

AD 2015-09-05 Airworthiness Directives; The Boeing Company Airplanes

2015-06-16
2015-05-12
39-18151
FAA-2014-0429
Airframe
—

Models named: 747-400, 747-400F. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to The Boeing Company Model 747-400 and 747-400F airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin 747-25A3640, dated January 8, 2014.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 24 months after the effective date of this AD, install a fiberglass reinforcing overcoat on the MEC drip shield, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-25A3640, dated January 8, 2014.

Unsafe condition

This AD was prompted by reports of cracking in the main equipment center (MEC) drip shield and exhaust plenum. We are issuing this AD to prevent water penetration into the MEC, which could result in an electrical short and potential loss of several functions essential for safe flight.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1