TrackAD

Airworthiness directives › 2015-23-04

AD 2015-23-04 Airworthiness Directives; General Electric Company Turbofan Engines

2015-12-17
2015-11-12
39-18320
FAA-2015-1658
Engine
—

Applicability*9

This AD applies to all General Electric Company (GE) GEnx-1B model turbofan engines with oil filler cap, part number (P/N) 2349M62G01, installed, that do not contain any of the following markings after the P/N on the oil filler cap scupper: “P/M BALL PP,” or “RW,” or “79-0022.”

Compliance

The Manager, Engine Certification Office, FAA, may approve AMOCs to this AD. Use the procedures found in 14 CFR 39.19 to make your request. You may email your request to: ANE-AD-AMOC@faa.gov.

Required actions

(1) For more information about this AD, contact Christopher McGuire, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; phone: 781-238-7120; fax: 781-238-7199; email: chris.mcguire@faa.gov. (2) GE GEnx-1B SB No. 79-0022, Revision 1, dated May 13, 2015, which is not incorporated by reference in this AD, can be obtained from GE using the contact information in paragraph (g)(3) of this AD. (3) For service information identified in this AD, contact General Electric Company, GE Aviation, Room 285, 1 Neumann Way, Cincinnati, OH 45215; phone: 513-552-3272; email: geae.aoc@ge.com. (4) You may view this service information at the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA. For information on the availability of this material at the FAA, call 781-238-7125. Issued in Burlington, Massachusetts, on November 4, 2015. Carlos Pestana, Acting Directorate Manager, Engine & Propeller Directorate, Aircraft Certification Service. [FR Doc. 2015-28747 Filed 11-10-15; 8:45 am] BILLING CODE 4910-13-P

Unsafe condition

Comply with this AD within the compliance times specified, unless already done. (1) Within 360 cycles in service after the effective date of this AD, remove the ball valve, P/N 2349M68P01, from the affected oil filler cap and replace with a part eligible for installation. (2) Reserved.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1