TrackAD

Airworthiness directives › 2016-01-17

AD 2016-01-17 Airworthiness Directives; Bombardier, Inc. Airplanes

2016-02-25
2016-01-21
39-18377
FAA-2015-1987
Airframe
—

Applicability*9

This AD applies to Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, certificated in any category, serial numbers 10002 and subsequent, as identified in Bombardier Service Bulletin 670BA-32-042, Revision A, dated July 2, 2014, including Appendixes A and B, both dated November 5, 2013.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 660 flight hours or 12 months after the effective date of this AD, whichever occurs first: Do a detailed inspection for damage (including deformation, pulled or missing fasteners on the inner skins and outer skin, and cracks) on the inner skins, outer skin, and the forward member of the inboard MLG doors, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 670BA-32-042, Revision A, dated July 2, 2014, including Appendixes A and B, both dated November 5, 2013. Repeat the inspection thereafter at intervals not to exceed 660 flight hours or 12 months, whichever occurs first.

Unsafe condition

This AD was prompted by reports of cracked forward door members of the inboard main landing gear (MLG) doors. We are issuing this AD to prevent loss of an MLG door during flight, which could result in damage to the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1