Airworthiness directives › 2016-04-13
AD 2016-04-13 Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Applicability*9
This AD applies to Rolls-Royce plc (RR) RB211 Trent 768-60, 772-60, and 772B-60 turbofan engines, all serial numbers, except those engines: (1) That have had Modification 72-H754 applied in production, or (2) that have been modified in accordance with RR Service Bulletin (SB) No. RB.211-72-H754, including the Supplement, Revision 1, dated July 29, 2015 or initial issue dated October 1, 2014; or (3) with sealing sleeve, part number (P/N) FW15003, with markings 102013, 112013, or 102013L.
Compliance
The Manager, Engine Certification Office, FAA, may approve AMOCs to this AD. Use the procedures found in 14 CFR 39.19 to make your request. You may email your request to: ANE-AD-AMOC@faa.gov.
Required actions
(1) For more information about this AD, contact Philip Haberlen, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 1200 District Avenue, Burlington, MA 01803; phone: 781-238-7770; fax: 781-238-7199; email: philip.haberlen@faa.gov. (2) Refer to MCAI, European Aviation Safety Agency, AD 2015-0105R1, dated August 18, 2015, for more information. You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov/#!documentDetail;D=FAA-2014-0561-0003.
Unsafe condition
Comply with this AD within the compliance times specified, unless already done. (1) If sealing sleeve, P/N FW15003, is installed without markings 102013, 112013, or 102013L, or if the markings cannot be sufficiently identified, then within 1,600 flight cycles or 24 months after the effective date of this AD, whichever occurs first: (i) Remove the affected sealing sleeve, P/N FW15003, and replace it with a part eligible for installation. Use paragraph 3.A.(4)(b) of RR Alert Non-Modification Service Bulletin No. RB.211-72-AJ035, Revision 2, dated August 10, 2015, to perform the part replacement, or, (ii) Remove the affected sealing sleeve, P/N FW15003, and the oil feed tube, P/N FW14193, and replace with parts eligible for installation. Use paragraph 3.B. or 3.C., as appropriate, of RR SB No. RB.211-72-H754, including the Supplement, Revision 1, dated July 29, 2015, to perform the parts replacement. (2) Reserved.
Affected ADs
This AD supersedes AD 2015-04-03.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1