TrackAD

Airworthiness directives › 2016-06-09

AD 2016-06-09 Airworthiness Directives; Turbomeca S.A. Turboshaft Engines

2016-04-06
2016-03-22
39-18440
FAA-2016-2701
Engine
—

Applicability*9

This AD applies to all Turbomeca S.A. Makila 2A and 2A1 turboshaft engines that have incorporated Turbomeca S.A. Service Bulletin No. 298 79 2831, Version B, dated November 13, 2015, or earlier.

Compliance

The Manager, Engine Certification Office, FAA, may approve AMOCs for this AD. Use the procedures found in 14 CFR 39.19 to make your request. You may email your request to: ANE-AD-AMOC@faa.gov.

Required actions

(1) For more information about this AD, contact Besian Luga, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 1200 District Avenue, Burlington, MA 01803; phone: 781-238-7750; fax: 781-238-7199; email: besian.luga@faa.gov . (2) Refer to MCAI European Aviation Safety Agency AD 2016-0016, dated January 15, 2016, for more information. You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating it in Docket No. FAA-2016-2701. (3) Turbomeca S.A. Alert Mandatory Service Bulletin No. A298 79 2835, Version A, dated January 14, 2016, which is not incorporated by reference in this AD, can be obtained from Turbomeca S.A., using the contact information in paragraph (g)(4) of this AD. (4) For service information identified in this AD, contact Turbomeca S.A., 40220 Tarnos, France; phone: 33 0 5 59 74 40 00; telex: 570 042; fax: 33 0 5 59 74 45 16. (5) You may view this service information at the FAA, Engine & Propeller Directorate, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call 781-238-7125.

Unsafe condition

Comply with this AD within the compliance times specified, unless already done. (1) Within 30 engine hours or 7 days after the effective date of this AD, whichever occurs first, apply 15 Newton-meters torque to the nut, part number 9560130990, attaching the swivel union to the engine power turbine module M04. Use a backup wrench to prevent the swivel union from rotating.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1