TrackAD

Airworthiness directives › 2016-11-20

AD 2016-11-20 Airworthiness Directives; B/E Aerospace Protective Breathing Equipment Part Number 119003-11

Superseded. This directive was replaced by AD 2017-18-12. Work to the current one.
2016-07-15
2016-06-10
39-18547
FAA-2015-2134
Appliance
2017-18-12

Applicability*9

This AD applies to B/E Aerospace Protective Breathing Equipment (PBE), part number (P/N) 119003-11, that is installed on airplanes.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 3 months after July 15, 2016 (the effective date of this AD), while still in the stowage box, physically inspect the PBE pouch to determine if it has an intact vacuum seal. Do this inspection following paragraph III.A.1. of the Accomplishment Instructions in B/E Aerospace Service Bulletin No. 119003-35-011, Rev. 000, dated February 4, 2015.

Unsafe condition

This AD was prompted by a report of a PBE, P/N 119003-11, catching fire upon activation by a crewmember. We are issuing this AD to correct the unsafe condition on these products.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1