Airworthiness directives › 2016-18-09
AD 2016-18-09 Airworthiness Directives; Airbus Airplanes
Models named: A318-111, -112, -121, -122, A319-111, -113, -114, -115, -131, -132. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to the airplanes identified in paragraphs (c)(1), (c)(2), and (c)(3) of this AD, certificated in any category, all manufacturer serial numbers, except those on which Airbus Modification 37878 has been embodied in production, or Airbus Service Bulletin A320-53-1281 has been done in service. (1) Airbus Model A318-111, -112, -121, and -122 airplanes. (2) Airbus Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes. (3) Airbus Model A320-211, -212, -214, -231, -232, and -233 airplanes.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
(1) Within the compliance times identified in paragraphs (g)(1)(i) and (g)(1)(ii) of this AD, whichever occurs later, do a detailed inspection for damage (including chafing marks) on the fuselage skin, including previously repaired areas, at frame (FR) 34 between stringer (STR) 43 on the left-hand and right-hand sides, in accordance with paragraph 3.C., “Procedure,” of Airbus Service Bulletin A320-53-1287, dated July 29, 2014. Repeat the inspection thereafter at intervals not to exceed 12,000 flight cycles or 24,000 flight hours, whichever occurs first. (i) Before exceeding 12,000 flight cycles or 24,000 flight hours, whichever occurs first since the airplane's first flight. (ii) Within 5,000 flight cycles or 10,000 flight hours, whichever occurs first after the effective date of this AD. (2) If any damage is detected during any inspection required by paragraph (g)(1) of this AD, before further flight, do all applicable related investigative and corrective actions, in accordance with the Accomplishment Instructions of Airbus Service Bulletin A320-53-1287, dated July 29, 2014, except as required by paragraph (g)(3) of this AD. (3) If any cracking is found during any related investigative action required by paragraph (g)(2) of this AD, or if any damage detected during the inspection required by paragraph (g)(1) of this AD exceeds the limits defined in the Accomplishment Instructions of Airbus Service Bulletin A320-53-1287, dated July 29, 2014, before further flight, repair using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the European Aviation Safety Agency (EASA); or Airbus's EASA Design Organization Approval (DOA).
Unsafe condition
This AD was prompted by reports of chafing damage on the fuselage skin at the bottom of certain frames, underneath the fairing structure. We are issuing this AD to detect and correct damage to the fuselage skin, which could lead to crack initiation and propagation, possibly resulting in reduced structural integrity of the fuselage.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1