TrackAD

Airworthiness directives › 2017-01-03

AD 2017-01-03 Airworthiness Directives; The Boeing Company

2017-03-14
2017-02-07
—
—
Appliance
—

Models named: 717-200. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all The Boeing Company Model 717-200 airplanes, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

This paragraph restates the requirements of paragraph (h) of AD 2007-11-13, with no changes. Within 180 days after June 29, 2007 (the effective date of AD 2007-11-13): Revise the ALS of the Instructions for Continued Airworthiness, ALI in accordance with Boeing 717-200 ALI, Report MDC-96K9063, Revision 5, dated February 2006.

Unsafe condition

This AD was prompted by a new Airworthiness Limitations Instruction (ALI) revision that incorporates nondestructive inspection (NDI) techniques and reduced repetitive inspection intervals for three principal structural elements (PSEs). We are issuing this AD to detect and correct fatigue cracking of certain PSEs, which could adversely affect the structural integrity of the airplane.

Affected ADs

This AD replaces AD 2007-11-13, Amendment 39-15070 (72 FR 29237, May 25, 2007) (“AD 2007-11-13”).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1