Airworthiness directives › 2017-20-03
AD 2017-20-03 Airworthiness Directives; Dassault Aviation Airplanes
Models named: FALCON 7X. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to Dassault Aviation Model FALCON 7X airplanes, certificated in any category, serial numbers (S/Ns) 2 through 215 inclusive.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
Within 99 months or 4,100 flight cycles, whichever occurs first, since the date of issuance of the original airworthiness certificate or date of issuance of the original export certificate of airworthiness; or within 60 days after the effective date of this AD; whichever occurs later: Do a general visual inspection of the affected electrical wiring of the airplane for worn or damaged wiring or connectors due to inadequate clearance between wiring and nearby structures, accomplish all applicable corrective actions, and modify the airplane, in accordance with the Accomplishment Instructions of Dassault Service Bulletin 7X-056, Revision 1, dated July 20, 2016, as specified in table 1 to paragraph (g) of this AD. Do all applicable corrective actions before further flight. The “Dassault service bulletin 7X-056 section” identified in table 1 to paragraph (g) of this AD is not required for airplanes on which a corresponding Dassault modification has been embodied in production, as identified in the “Excluded” column in table 1 to paragraph (g) of this AD. Table 1 to Paragraph ( g ) of This AD—Applicable Sections of Dassault Service Bulletin 7X-056, Revision 1, Dated July 20, 2016 Dassault Service Bulletin 7X-056 section Excluded 7X-056-1 Post-mod M876. 7X-056-2 Post-mod M897. 7X-056-3 Post-mod M900. 7X-056-4 S/Ns 132 through 215 inclusive. 7X-056-5 Post-mod M954. 7X-056-6 Post-mod M980. 7X-056-7 Post-mod M1021. 7X-056-8 None.
Unsafe condition
This AD was prompted by a review showing that inadequate clearance may exist between certain electrical wiring and nearby structures. We are issuing this AD to detect and correct inadequate clearances between electrical wiring and nearby structures, which could lead to interference or contact with a structure and cause an electrical short circuit or fluid leakage. This could result in the loss of several functions essential for safe flight.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1