TrackAD

Airworthiness directives › 2018-02-20

AD 2018-02-20 Airworthiness Directives; The Boeing Company Airplanes

2018-03-16
2018-02-09
39-19173
FAA-2017-0630
Airframe
—

Models named: 777-200, -200LR, -300, -300ER series. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin 777-53A0083, dated April 20, 2017.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as required by paragraphs (h)(1) through (h)(3) of this AD: At the applicable times specified in paragraph 1.E., “Compliance,” of Boeing Alert Service Bulletin 777-53A0083, dated April 20, 2017, do all applicable actions identified as “RC” (required for compliance) in, and in accordance with, the Accomplishment Instructions of Boeing Alert Service Bulletin 777-53A0083, dated April 20, 2017.

Unsafe condition

This AD was prompted by reports of corrosion in the aft fuselage. We are issuing this AD to detect and correct untreated vacuum waste system spills or leaks, which could cause corrosion of the airplane structure, which could lead to fatigue cracks, and could ultimately result in rapid decompression and loss of structural integrity.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1