Airworthiness directives › 2018-06-09
AD 2018-06-09 Airworthiness Directives; Pacific Aerospace Limited Airplanes
Makes named: pacific aerospace. Models named: 750XL. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to Pacific Aerospace Limited Models 750XL airplanes, all serial numbers up to and including serial number XL215, certificated in any category.
Compliance
Unless already done, do the actions in paragraph (f)(1) and (2) of this AD following the Accomplishment Instructions in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/093, Issue 1, dated December 15, 2017. (1) Within 30 days after April 9, 2018 (the effective date of this AD), inspect the ventilation, heater, and air filter bypass control tee handles (as applicable) for snagging of the control column. (2) If the control column snags the adjacent heater, ventilation, or an engine air filter bypass control tee handle during the inspection required in paragraph (f)(1) of this AD, before further flight, reorient the affected tee handle.
Required actions
The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, Small Airplane Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Mike Kiesov, Aerospace Engineer, FAA, Small Airplane Standards Branch, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4144; fax: (816) 329-4090; email: mike.kiesov@faa.gov. Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA Flight Standards District Office (FSDO), or lacking a PI, your local FSDO. (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, Standards Office, FAA; or the Civil Aviation Authority of New Zealand (CAA).
Unsafe condition
This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the possibility for the control column to snag on the cockpit control tee handles on certain aircraft. We are issuing this AD to prevent the control tee handles from snagging the control column and becoming jammed, which could result in uncontrollable flight.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1