Airworthiness directives › 2018-07-09
AD 2018-07-09 Airworthiness Directives; Bombardier, Inc., Airplanes
Applicability*9
This AD applies to the airplanes identified in paragraphs (c)(1), (c)(2), and (c)(3) of this AD, certificated in any category, all certificated models. (1) Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, serial numbers 10001 through 10344 inclusive. (2) Bombardier, Inc., Model CL-600-2D15 (Regional Jet Series 705) and Model CL-600-2D24 (Regional Jet Series 900) airplanes, serial numbers 15001 through 15382 inclusive. (3) Bombardier, Inc., Model CL-600-2E25 (Regional Jet Series 1000) airplanes, serial numbers 19001 through 19044 inclusive.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
(1) For airplanes on which the actions specified in Bombardier Service Bulletin 670BA-25-101, dated December 17, 2015; or Bombardier Service Bulletin 670BA-25-101, Revision A, dated October 31, 2016, have not been done, as of the effective date of this AD: Within 6,600 flight hours or 36 months after the effective date of this AD, whichever occurs first, install protective sleeves on the bonding jumper wires of affected galleys and lavatories, in accordance with Part A through Part E, as applicable, of the Accomplishment Instructions of Bombardier Service Bulletin 670BA-25-101, Revision B, dated January 12, 2017. (2) For airplanes on which the actions specified in Bombardier Service Bulletin 670BA-25-101, dated December 17, 2015; or Bombardier Service Bulletin 670BA-25-101, Revision A, dated October 31, 2016, have been done, as of the effective date of this AD: Within 6,600 flight hours or 36 months after the effective date of this AD, whichever occurs first, inspect, and if required, install protective sleeves on the bonding jumper wires of affected galleys and lavatories, in accordance with Part F of the Accomplishment Instructions of Bombardier Service Bulletin 670BA-25-101, Revision B, dated January 12, 2017.
Unsafe condition
This AD was prompted by a report of a smoke-in-cabin event due to a non-sustaining electrical fire. We are issuing this AD to prevent an electrical short of a bonding jumper wire that may result in in-flight smoke or fire events, as well as failure of avionics equipment, due to possible water spray or leakage from a damaged water supply line.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1