TrackAD

Airworthiness directives › 2018-12-08

AD 2018-12-08 Airworthiness Directives; Airbus Airplanes

Superseded. This directive was replaced by AD 2018-18-16. Work to the current one.
2018-08-22
2018-07-18
—
—
Airframe
2018-18-16

Models named: A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to the airplanes, certificated in any category, identified in paragraphs (c)(1) and (c)(2) of this AD, all manufacturer serial numbers on which Airbus Modification 44360 has been embodied in production. (1) Airbus Model A330-201, -202, -203, -223, -243, -301, -302, -303, -321, -322, -323, -341, -342, and -343 airplanes. (2) Airbus Model A340-212, -213, -312, and -313 airplanes.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Accomplish the actions required by paragraph (h) of this AD at the times specified in paragraphs (g)(1) and (g)(2) of this AD, as applicable. (1) For airplanes having serial numbers 0176 through 0915 inclusive: Within the compliance times defined in table 1 to paragraph (g)(1) of this AD, and, thereafter, at intervals not to exceed the compliance times defined in Airbus Service Bulletin A330-53-3215, Revision 03, dated January 22, 2018 (“A330-53-3215, R3”); or Airbus Service Bulletin A340-53-4215, Revision 02, dated November 23, 2016 (“A340-53-4215, R2”); as applicable, depending on airplane utilization and configuration. As of the effective date of this AD, where paragraph 1.E. “Compliance,” of A330-53-3215, R3 specifies weight variant (WV) 050 in the condition column of table 1, configuration 003, for the purposes of this AD, WV060 and WV080 are also included. ER18JY18.000 (2) For all airplanes except those identified in paragraph (g)(1) of this AD: Before exceeding the applicable compliance time “threshold” defined in paragraph 1.E., “Compliance,” of A330-53-3215, R3; or A340-53-4215, R2; as applicable, depending on airplane utilization and configuration and to be counted from airplane first flight, and, thereafter, at intervals not to exceed the compliance times specified in paragraph 1.E., “Compliance” of A330-53-3215, R3; or A340-53-4215, R2; as applicable, depending on airplane utilization and configuration. Where paragraph 1.E. “Compliance,” of A330-53-3215, R3 specifies weight variant WV050 in the condition column of table 1, configuration 003, for the purposes of this AD, WV060 and WV080 are also included.

Unsafe condition

This AD was prompted by a report of cracking at fastener holes located at frame (FR) 40 on the lower shell panel junction. We are issuing this AD to detect and correct cracking at FR40 on the lower shell panel junction; such cracking could lead to reduced structural integrity of the fuselage.

Affected ADs

This AD replaces AD 2017-07-07, Amendment 39-18845 (82 FR 18547, April 20, 2017) (“AD 2017-07-07”).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1