TrackAD

Airworthiness directives › 2018-14-12

AD 2018-14-12 Airworthiness Directives; General Electric Company Turbofan Engines

2018-08-30
2018-07-26
39-19332
FAA-2018-0224
Engine
—

Applicability*9

This AD applies to General Electric Company (GE) GEnx-1B64, -1B64/P1, -1B64/P2, -1B67, -1B67/P1, -1B67/P2, -1B70, -1B70/75/P1, -1B70/75/P2, -1B70/P1, -1B70/P2, -1B70C/P1, -1B70C/P2, -1B74/75/P1, and -1B74/75/P2 engines with air/oil extension duct, part number (P/N) 2332M85P01 or 2331M25G03, installed.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

At the next engine shop visit after the effective date of this AD, remove air/oil extension ducts, P/N 2332M85P01 or 2331M25G03, and replace with a part eligible for installation.

Unsafe condition

This AD was prompted by reports of a center vent tube (CVT) failure. We are issuing this AD to prevent failure of the CVT. The unsafe condition, if not addressed, could result in failure of one or more engines, loss of thrust control, and loss of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1