Airworthiness directives › 2018-19-03
AD 2018-19-03 Airworthiness Directives; Fokker Services B.V. Airplanes
Models named: F28 Mark 0070, 0100. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes, certificated in any category, all manufacturer serial numbers, if equipped with Goodrich main landing gear (MLG).
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
Within 30 days after the effective date of this AD, do a detailed visual inspection of each MLG piston part number (P/N) 41141-5, in accordance with the Accomplishment Instructions of Fokker Service Bulletin SBF100-32-169, dated August 23, 2017.
Unsafe condition
This AD was prompted by a report of cracks, in various directions, in the lower portion of a MLG piston. We are issuing this AD to detect and correct cracks in the lower portion of the MLG, which could lead to MLG failure during the landing roll-out, and possibly result in damage to the airplane and injury to occupants.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1