TrackAD

Airworthiness directives › 2019-03-14

AD 2019-03-14 Airworthiness Directives; Dassault Aviation Airplanes

Superseded. This directive was replaced by AD 2020-02-13. Work to the current one.
2019-04-08
2019-03-04
39-19566
FAA-2018-0963
Airframe
2020-02-13

Models named: FAN JET FALCON, FAN JET FALCON SERIES C, D, E, F, G. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Dassault Aviation Model FAN JET FALCON and FAN JET FALCON SERIES C, D, E, F, and G airplanes, certificated in any category, all serial numbers, on which the Dassault Fan Jet Falcon Supplemental Structural Inspection Program (Dassault Service Bulletin (SB) 730), has been embodied into the airplane's maintenance program.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the airworthiness limitations specified in Chapter 5-40-01, Airworthiness Limitations, DMD 44729, Revision 9, dated November 29, 2017, of the Dassault Aviation Falcon 20 Maintenance Manual. The initial compliance time for accomplishing the actions is at the applicable time specified in Chapter 5-40-01, Airworthiness Limitations, DMD 44729, Revision 9, dated November 29, 2017, of the Dassault Aviation Falcon 20 Maintenance Manual; or within 90 days after the effective date of this AD; whichever occurs later. Where the threshold column in the table in paragraph B, Mandatory Maintenance Operations, of Chapter 5-40-01, Airworthiness Limitations, DMD 44729, Revision 9, dated November 29, 2017, of the Dassault Aviation Falcon 20 Maintenance Manual specifies a compliance time in years, those compliance times start from the date of issuance of the original airworthiness certificate or date of issuance of the original export certificate of airworthiness.

Unsafe condition

This AD was prompted by a determination that new and more restrictive airworthiness limitations and maintenance requirements are necessary. We are issuing this AD to address, among other things, fatigue cracking and damage in principal structural elements; such fatigue cracking and damage could result in reduced structural integrity of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1