TrackAD

Airworthiness directives › 2019-11-09

AD 2019-11-09 Airworthiness Directives; Airbus SAS Airplanes

2019-07-25
2019-06-20
39-19655
FAA-2018-1068
Airframe
—

Models named: A319-113, -114, A320-211, -212. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all Airbus SAS Model A319-113 and -114 airplanes, and Model A320-211 and -212 airplanes, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with European Aviation Safety Agency (EASA) AD 2018-0212, dated September 28, 2018 (“EASA AD 2018-0212”), or EASA AD 2018-0212R1, dated March 28, 2019 (“EASA AD 2018-0212R1”).

Unsafe condition

This AD was prompted by a report that a life-limit of 64,000 flight cycles has been established for certain titanium crossbeams of the forward engine mount. The FAA is issuing this AD to address failure of a crossbeam of the forward engine mount, which could result in detachment of the engine and consequent reduced controllability of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1