TrackAD

Airworthiness directives › 2019-15-01

AD 2019-15-01 Airworthiness Directives; Bombardier, Inc., Airplanes

2019-09-19
2019-08-15
39-19694
FAA-2019-0186
Airframe
—

Applicability*9

This AD applies to all Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

For airplane serial numbers (S/Ns) 5301 through 5665 inclusive, 5701 through 5988 inclusive, and 6050 through 6091 inclusive, equipped with any MLG side stay actuator assembly containing split ball bearing part number (P/N) 104467672: For the left and right MLG side stay actuator assemblies having P/Ns 19011-103 and 19011-105, at the applicable time specified in figure 1 to paragraphs (g) and (h) of this AD, perform an inspection to verify the serial number, in accordance with paragraphs 2.A. and 2.B. of the Accomplishment Instructions of the applicable service information specified in figure 2 to paragraphs (g), (h), and (i) of this AD. ER15AU19.003 ER15AU19.004

Unsafe condition

This AD was prompted by a report that main landing gear (MLG) side stay actuators have been assembled using nonconforming split ball bearings. The FAA is issuing this AD to address the affected bearings, which could potentially result in asymmetric MLG gear extension or retraction, and subsequent gear collapse during landing.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1