Airworthiness directives › 2019-18-02
AD 2019-18-02 Airworthiness Directives; Leonardo S.p.A. Helicopters
Applicability*9
This AD becomes effective October 16, 2019.
Compliance
(1) The Manager, Safety Management Section, Rotorcraft Standards Branch, FAA, may approve AMOCs for this AD. Send your proposal to: Matt Fuller, Senior Aviation Safety Engineer, Safety Management Section, Rotorcraft Standards Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone (817) 222-5110; email 9-ASW-FTW-AMOC-Requests@faa.gov. (2) For operations conducted under a 14 CFR part 119 operating certificate or under 14 CFR part 91, subpart K, the FAA suggests that you notify your principal inspector, or lacking a principal inspector, the manager of the local flight standards district office or certificate holding district office before operating any aircraft complying with this AD through an AMOC.
Required actions
The subject of this AD is addressed in European Aviation Safety Agency (EASA) AD No. 2017-0155, dated August 23, 2017. You may view the EASA AD on the internet at http://www.regulations.gov in Docket No. FAA-2018-0057.
Unsafe condition
Within 70 hours time-in-service: (1) Replace the seals and filler wedges on the left hand (LH) and right hand (RH) cockpit door upper windows. Note 1 to paragraphs (e)(1) and (2) of this AD: Leonardo refers to filler wedges as “non-metallic channels.” (2) Replace the seals and filler wedges on the forward LH and RH passenger door windows. For helicopters without passenger sliding window kit part number (P/N) 6F5630F00411, also replace the seals and filler wedges of the aft LH and RH passenger door windows. (3) For helicopters with a strap P/N A487A003A, replace each strap with emergency exit window handle P/N 8G9500L00151 on the internal side of the window and P/N 8G9500L00251 on the external side of the window. (4) Remove any decal P/N A180A005E21 from the internal side of the passenger and cockpit windows and replace with decal P/N A180A022E21, using as a reference Figure 1 and Figure 2 of Leonardo Service Bulletin No. 169-032, Revision A, dated September 8, 2017 (SB No. 169-032). (5) Remove any decal P/N A487A003A from the external side of the passenger and cockpit windows and replace with decals P/N AW003DE005E33B, using as a reference Figure 3 of SB No. 169-032.
Affected ADs
This AD defines the unsafe condition as failure of an emergency window to jettison, which could prevent occupants from evacuating the helicopter during an emergency.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1