TrackAD

Airworthiness directives › 2019-18-06

AD 2019-18-06 Airworthiness Directives; Airbus SAS Airplanes

2019-10-31
2019-09-26
39-19733
FAA-2019-0486
Airframe
—

Applicability*9

This AD applies to Airbus SAS Model A318-112, -121, and -122; A319-111, -112, -115, -131, -132, and -133; A320-214, -216, -232, -233, -251N, and -271N; and A321-211, -212, -213, -231, -232, -251N, -253N, -271N, and -272N airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2019-0069, dated March 28, 2019 (“EASA AD 2019-0069”).

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2019-0069.

Unsafe condition

This AD was prompted by reports of missing or loosened fasteners on connecting brackets of overhead stowage compartments (OHSC) and pivoting OHSC (POHSC). The FAA is issuing this AD to address loosening of the OHSC or POHSC fasteners. This condition, if not corrected, could lead to detachment of OHSC or POHSC, possibly resulting in injury to airplane occupants and/or impeding egress during an emergency evacuation.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1