TrackAD

Airworthiness directives › 2019-24-14

AD 2019-24-14 Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes

2020-02-03
2019-12-30
39-21003
FAA-2019-0674
Airframe
—

Models named: 328-100. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to 328 Support Services GmbH Model 328-100 airplanes, certificated in any category, serial numbers 3032 through 3063 inclusive.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2019-0096, dated April 30, 2019 (“EASA AD 2019-0096”).

Unsafe condition

This AD was prompted by a report of missing rivets on landing flap support arm 2. The FAA is issuing this AD to address missing rivets, which could lead to the loss of one of two load paths, reducing the fatigue life of the affected flap arms and leading to fatigue cracking of the support arms of the flaps, which could result in reduced structural integrity of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1