TrackAD

Airworthiness directives › 2020-03-15

AD 2020-03-15 Airworthiness Directives; Airbus SAS Airplanes

2020-04-02
2020-02-27
39-19840
FAA-2019-0727
Airframe
—

Models named: A321-211, -212, -213, -231, -232. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Airbus SAS Model A321-211, -212, -213, -231, and -232 airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2019-0098, dated May 3, 2019 (“EASA AD 2019-0098”).

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2019-0098.

Unsafe condition

This AD was prompted by a report of erroneous positioning of affected parts on the skin of the fuselage during the pre-drill phase, which could result in unwanted drill-starts. The FAA is issuing this AD to address unwanted drill-starts, which could affect the fatigue properties of affected fuselage skin parts and possibly result in cracking of fuselage skin.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1