TrackAD

Airworthiness directives › 2020-04-01

AD 2020-04-01 Airworthiness Directives; Pratt & Whitney Turbofan Engines

2020-03-27
2020-02-21
39-21101
FAA-2019-0596
Engine
—

Applicability*9

This AD applies to all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521GA, PW1524G, PW1525G, PW1521G-3, PW1524G-3, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

(1) Within 300 engine cycles from the effective date of this AD, perform an initial gap inspection with a 0.001 inch feeler gauge between the LP10 oil supply tube, part number (P/N) 5312624-01, and the FOC, P/N 5306769. (i) If any gap is found, remove the LP10 oil supply tube and the FOC and replace with parts eligible for installation prior to further flight. (ii) If no gap is found, repeat this inspection every 850 engine cycles since the previous inspection. (2) At the next shop visit after the effective date of this AD, remove the LP10 oil supply tube, P/N 5312624-01, and the FOC, P/N 5306769, and replace with parts eligible for installation.

Unsafe condition

This AD was prompted by reports of two in-flight shutdowns due to oil leaking from the connection between the LP10 oil supply tube and the fuel oil cooler (FOC). The FAA is issuing this AD to prevent failure of the LP10 oil supply tube, engine fire and damage to the airplane. The unsafe condition, if not addressed, could result in engine fire and damage to the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1